Torque spec for 1RZ harmonic balancer

For the vehicle that only you know what it is! :>D

Torque Ratings Smaller Chevy models should have the harmonic damper bolt set to 60 foot-pounds. Larger Chevy vehicles should have a torque of 85 foot-pounds. Hemi426, smaller Chrysler and larger Chrysler motors should have a harmonic damper bolt set to 135 food-pounds.

Harmonic Balancer Torque Specs - It Still Runs

Head, Rods, Mains

https://www.mahle-aftermarket.com/media/local-media-north-america/pdfs-&-thumbnails/torque3.pdf

Camshaft

https://f01.justanswer.com/dcraig1000/4b59f200-a8bf-42ee-a027-7c2ddd2aefae_eee.pdf

Harmonic Balancer Pulley

Timing Belt

f01.justanswer.com > dcraig1000

PDF 12/14/2017. Engine - 1.5L EcoBoost (118kW/160PS) - Timing Belt - Removal and Installation • 2014 Ford Fusion • MotoLogic ... Crankshaft Vibration Damper. 7. Torque: Stage 1: 74 lb.ft (100 Nm). Stage 2: 90°. Stage 3: Wait 2s. Stage 4: 15° ...

Here is a post with the torque specs. https://www.taurusclub.com/forum/82-maintenance-repair/254498-need-torque-specs-harmonic-balancer.html

Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

from 98 GM manual crank balancer bolt 270Nm or 200' lbs
crank pulley bolts 50Nm 0r 37' lbs

Copied from this site;
Harmonic balancer torque value Diesel Place Chevrolet and GMC Diesel Truck...

Hope this helps.

B: INSTALLATION
1) Install the crankshaft pulley.
2) Install the pulley bolt.
To lock the crankshaft, use ST.
ST 499977400 CRANKSHAFT PULLEY
WRENCH
(1) Clean the crankshaft pulley thread using an
air gun.
(2) Apply engine oil to the crankshaft pulley bolt
seat and thread.
(3) Tighten the bolts temporarily with tightening
torque of 44 N·m (4.5 kgf-m, 33 ft-lb).
(4) Tighten the crankshaft pulley bolts.
Tightening torque:
127 N·m (13 kgf-m, 94.0 ft-lb)

Your pulley has a woodruff key like the one in the photo. In order to have zero play, you need to replace the key and the harmonic balancer

the garage may have did something to the crank position sensor that is located behind the harmonic balance. there is a ring gear there to for the timing

torque specs for the harmonic balancer

not sure if this link will help you out... Torque spec for 1993 stealth RT front crankshaft pulley bolt Google Search