1999 Ford Ranger SuperCab Logo
Posted on Dec 11, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Ford ranger truck overheating

99 3 liter Ford Ranger pickup truck keeps overheating. Have changed the radiator, thermostat, water pump & clutch fan, radiator cap, belts. Continues to overheat with the heat gauge going up and blowing all fluids from radiator then return to normal.

  • 2 more comments 
  • ct81888 Jan 15, 2009

    my 99 ranger v6 3.0 is overheating replaced thermostat clutch water pump top and bottom hose had it flushed pressure checked and still overheating while driving but when i let off the gas it goes back to normal but have to add more fluid because it comes out of reservoir!

  • GJhogle Feb 13, 2009

    I have a 2000 ford ranger, I replaced the thermostat after over heating, this did not solve the problem, I then replaced the raidator with a new one and it still overheats. the temp gage is all over the place, just before over heating it loses the hot air in the heating system.

  • Anonymous Mar 25, 2014

    overheating

  • Anonymous Mar 29, 2014

    my 1996 ford f150 keeps overheating i have changed water pump radiator thermostat hoses and still runs hot

×

3 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Feb 21, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Feb 21, 2009
Answers
1
Questions
1
Helped
10013
Points
25

I have had this happen with my ranger. Changed everything I could to try to fix the over heating. It turned out that I had a small leak in my head gasket and it was allowing exsaust gas to go into the cooling system witch was over pressurizing it. Also the air from the exsaust will heat up much faster than liquid making your thermostat to read hot and will not be able to blow hot air in the cab because there is no liquid going to the heater core. This happened to me when my blet came off and I tryed to make it home. If you had it over heat for a long peirod of time it may have ripped the head gasket.

Mike Butler

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Ford Master 6,674 Answers
  • Posted on Dec 21, 2008
Mike Butler
Ford Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Aug 14, 2008
Answers
6674
Questions
10
Helped
2894346
Points
19845

You did let it run quite a while with heater on full while refilling the coolant to make sure all air bled out right? Well try it again with cap off, and rev the engine slightly once in a while for a few seconds, then let it idle again. Keep doing this as long as your gauge stays in normal range, Until you can see the flow increase in the rad, about 2 or 3 times at least. You'll see it flow faster when the thermostat opens. while watching it, keep an eye for bigger size bubbles, which indicates air obviously, but they should disappear or at least get very minimal after a while. Continuous larger bubbles, may indicate a bad head gasket, or cracked/warped head, or both. Let's not go there until we try the other though. Feel your rad hoses too, (squeeze them) especially your lower one, as it could be soft & spongy, and collapsing during driving & restricting the flow to the engine. If it feels weak at all, after all you've done, I'd do them too just to be sure, if they feel weak at all. Keep us posted

Ad

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Mar 23, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Mar 23, 2009
Answers
1
Questions
0
Helped
10013
Points
1

Waterpump bad blades gone

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1992 ford ranger still running hot after replacing all hoses, thermostat, radiator, and water pump. what else could be the problem?

Do you have the right mix on the coolant you have in the engine? Could you have trapped air in the coolant system, did you have the heater system on when you were filling up with coolant. I assume you changed the radiator cap when you replaced radiator. I guess it could be caused by headgasket, are you loosing coolant, does oil look milky or oil in coolant. Belo link list a few things to look at but you have addressed most of them.
Ford Ranger Overheating (repairpal.com)

How to Replace Radiator Cooling Fan and Clutch 90-04 Ford Ranger V6 4.0L - YouTube

fan clutch good or bad? ' The Ranger Station

0helpful
2answers

Why does my 1988 ford ranger f-150 over heat

Thermostat is stuck or the radiator or heater core is blocked up.
0helpful
2answers

Help not sure what to do next my 1988 ford ranger 4x4 2.9L replace radiator from a 1 inch core to a 2 1/4 inch core my temp before used to run 190 but started to over heat placed new thermostat, new...

run engine and check for flow in radiator, also check for foaming or bubbles head gasket may have blown . you my have a faulty water pump, check viscus coupling on fan drive, and belt tension
0helpful
2answers

Ford ranger fan clutch

There may be a tool, or you jam a metal tool between two metal parts.
check these out:


Removing Stubborn Clutch fan Ranger Forums The Ultimate Ford Ranger...

Fan clutch removal


1helpful
1answer

3.0 v6 1993 ford ranger xlt overheating problems

Has to be the fan clutch,if it runs cool moving ,the air isn't being moved at low speed. Get a fan clutch,36 mm nut ,LEFT hand threaded
0helpful
1answer

2000 Ford Ranger pickup, 3.0 litre, V-6 gets sluggish while driving, finally stalls then stops. I have to wait for a short while, then starts up again. I did notice that the temperature gauge goes into...

From your description it sounds like your engine is overheating. Make sure you have enough coolant in the radiator and the coolant reseviour. Check your hoses, radiator, and waterpump for leaks. Have your thermostat replaced if it needs to be. If you can't get hot air from your vents when the engine is heated up it most likely means your water pump impeller is broke and it's not circulating coolant.
0helpful
2answers

2.3l ranger keeps overheating, been through two radiators already.

Hello Ranger Joe, eight months and two radiators is very uncommon. Question, Have you visually confirmed the leak in the radiators or is the leak near the hose connections? Replacing the radiator, cap, water pump, & the thermostat leaves only two others, the hoses and the engine block/heads. Far fitched will be something or somebody poking holes in the radiator.
15helpful
1answer

1990 ford ranger is overheating

If the cooling system has no bleeder valves to vent air, you may have to temporarily loosen a heater hose to get all the air out of the system...Also check to see if there is water in the oil...If there is water in the oil then it could have a head gasket problem....Excessive exhaust backpressure because of a clogged catalytic converter could also cause overheating..Also check belt tension and condition. A loose belt that slips may prevent the water pump from circulating coolant fast enough and/or the fan from turning fast for proper cooling...Another thing it could be is a faulty Water pump -- Any wobble in the pump shaft or seepage would call for replacement. In some instances, a pump can cause an engine to overheat if the impeller vanes are badly eroded due to corrosion or if the impeller has come loose from the shaft. The wrong pump may also cause an engine to overheat. Some engines with serpentine drive belts require a special water pump that turns in the opposite direction of those used on the same engine with ordinary V-belts... Also check the Fan -- With mechanical fans, most overheating problems are caused by a faulty fan clutch, though a missing fan shroud can reduce the fan's cooling effectiveness by as much as 50% (depending on the fan's distance from the radiator) which may be enough to cause the engine to overheat in hot weather or when working hard.
0helpful
1answer

1998 ford ranger 4.0 liter auto. runs hot while driving and cool while at idle. i have changed thermostat and fan clutch. ANY IDEAS?

You could benefit from a tow package upgrade including a tranny cooler if you don't already have one. You might want to pressure test the radiator, those things aren't immortal, and depending on where you live and how you drive, 10 years on a radiator is pretty good. seriously, pressure test the cooling system and go from there.
Not finding what you are looking for?

10,023 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...