Question about 2004 Honda Civic
Error code on radio ? how do i fix this?
Remove the battery terminal to clear the radio, then reinstall the cable, with the key on and the radio off hold down buttons #1 and #6 while turning the radio on, this will give u the serial # of the radio and u can give it to any dealership and they can give u the 5 digit radio code, If they wont just give it to me and I can help you.
Posted on Jul 24, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: what is the code?
Most hondas have the code on the vehicle itself for resetting the code once the battery has been disconected or radio removed. Try pulling the glove box out and looking on the inside of the cavity. You should not need a code to remove the radio the alarm should not go off, it is the installation. The radio will not work with any other --vehicle without your specific code, good thieves know this and would rather steal the whole car. "Especially the Honda Accord. Have one in the garage and a 2005 Pilot.
Posted on Jan 06, 2009
SOURCE: stereo error code
The code for the radio needs to be input.
the radio must have been disconnected from the battery.
look for the code on a card in the glove box. if no card, then u have to pull the stereo out and get the serial # to the dealership.
Posted on Aug 01, 2008
ok your radio displays ERR , OK 3 options let it sit for an hour turned on , to reture to CODE display , or pull the radio fuse out for a minute and put it back in , returning to the CODE display , or disconnect the battery for a minute , returning to the CODE display . you got the ERR display because the code was wrong or not entered correctly , make your choice of getting the radio back to the CODE display by 1 of those 3 choices , while the radio displays CODE , use the preset buttons , if the first number of your code is 4 , then press the #1 preset button 4 time , when the first number has been input , put the 2nd number in by pressing the #2 prest button , if 2nd number of code is 8 , press the # 2 preset button 8 times till the # 8 is displayed , and so on . you see where this is giong ? when you have entered all the numbers correctly you will have you radio back . when you say you have the radio code , good luck ! were rooting for ya .
Posted on Jan 19, 2009
SOURCE: code radio honda civic 2004
you will need the radios serial number which is located on top of the unit itself. Then take that number and any Honda dealer will be able to give you the new code. Sometimes it is on a sticker with your owners manual. i am still a tech and we run into this all of the time on Hondas.
Posted on Dec 04, 2009
Tips for a great answer:
Feb 27, 2011 | 2007 Honda Civic GX NGV Sedan
Feb 12, 2011 | 2004 Honda Civic
Oct 08, 2010 | 2004 Honda Civic
Dec 04, 2009 | 2004 Honda Odyssey
Jul 16, 2009 | 2004 Honda Civic
2,860 people viewed this question
Usually answered in minutes!