Just wanting to replace my key cylinder on my 90 chevy lumina sedan
I just did that last week. Remove horn, remove steering wheel, remove blinker switches, remove tilt spring, remove tilt mechanism, remove key buzzer switch (mine was white with 2 small wires leading to it). Screw holding ignition cylinder in should now be visible. P S Let me know if you have any trouble removing all the items listed above and I will try to help.
SOURCE: chevy lumina, lost keys, broke ignition, need to fix the wires
Solder and shrink tubing work fine for that. That is for the pk2 theft module that tells the car that you are using the correct key with the chip in it.
SOURCE: Fuel Pump Bad.
remove fuel tank from vehicle and remove lock ring from tank swap fuel pump out..make sure sealing ring is installed properly
SOURCE: how do you change a lock n key ignition switch on 1998 chevy 6 cy
STOP. STOP. STOP.
I WILL POST WITHIN THE HOUR.
In the meantime, click here for a few things you need to know before even considering working with undeployed airbags.
Mike
SOURCE: key won't turn in ignition...should I replace the
Try rocking the steering wheel back and forth. Also even though the tumbler is the cause most of the time you should check the electrical part of the switch at times when it goes it won't allow the key to turn. Rocking the steering wheel is so that you can make sure that it is not turning due to the steering lock putting to much pressure on the tumbler.
SOURCE: how to replace a key lock cylinder on a 99 chevy
how to replace the key lock cylinder in 99 chev lumina. it has a chip in the key
935 views
Usually answered in minutes!
no airbag
How to get the metal cover off behind the steering wheel on a 1990 Chevy Lumina to get the ignition out
how do you get that metal cover off behind the steering wheel on a 1990 Chevy lumina
×