After work I tried starting my 2004 Pacifica but it wouldn't start, I even got a jump and it still can't start.
SOURCE: Chrysler Pacifica will not start.
Most probably starter problems. It can be not starter itself some vires coming to it are loose. To locate the starter follow heavy wires coming from battery. This how starter looks like
http://www.autozone.com/N,16400045/shopping/partTypeResultSet.htm
Check the wires coming to it. Also check the fuse, it might be bad starter relay fuse too.
Please kindly let me know it the information was usefull for you or you still need more info
Good Luck
SOURCE: 2004 pacifica P0700 Transmission Control System (MIL Request)
You need to scan the tcm. Code p0700 in the ecm just tells you there is codes in the tcm.
SOURCE: what do these code means for my pacifica
P0513 is "Invalid Skim Key" The key may have damaged programing and if that is the case the dealer maybe able to reprogram that key for you (if you have 2 keys, both keys will have to be reprogramed so that they both match. Good Luck).
P0522 =Engine Oil Pressure Sensor/Switch Circuit Low Voltage.
Possible causes
- Low oil level or motor mechanical fault
- Open or short oil level sensor circuit condition
- Poor oil level sensor electrical connection
- Faulty oil pressure sensor
810 views
Usually answered in minutes!
×