2001 Oldsmobile Aurora Logo
Rich A Rich Posted on Jul 10, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Where is the o2 sensor located on my 01 aurora 4.0

1 Answer

William Charnigo

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 615 Answers
  • Posted on Aug 27, 2012
William Charnigo
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Jan 26, 2009
Answers
615
Questions
0
Helped
180489
Points
1130

There are 4 of them, on the exhaust manifolds and system. I replaced mine only to find out the real issue was the intake manifold plenum gasket.

4 Related Answers

Anonymous

  • 1450 Answers
  • Posted on Aug 20, 2008

SOURCE: 01 olds aurora

bank 1 sensor 1 will be in exhaust manifold by firewall in the middle. bank 1 sensor 2 will be behind convertor .bank 2 sensor 1 will be in the front manifold down at the end of it

Ad

Anonymous

  • 1615 Answers
  • Posted on Jul 18, 2009

SOURCE: o2 sensor

If you can't access it from from the engine compartment you will need to jack the car up and support it. You need a 7/8 box end wrench. Sometimes it take a special wrench due to the angle not accessable with a strait wrench. Its on the exhaust pipe in front of the cat

global1207

  • 300 Answers
  • Posted on Sep 07, 2010

SOURCE: 01 olds aurora 4.0 low coolant light on. Where is

The coolant level sensor is inside the coolant bottle. It is not replaceable separately. You will have to replace the reservoir to replace the sensor.

William Charnigo

  • 615 Answers
  • Posted on Apr 29, 2011

SOURCE: How many o2 sensors have a 2001 Oldsmolbile aurora

4.0 engine or 3.5?
On the 4.0 there are 4 sensors, some up front between the engine and radiator, some between the engine and firewall.
Caution, I replaced all of mine to fix a problem because they weren't reading. None of them were bad. Turned out to be a cracked intake plenum gasket which was only $30.00 and a lot easier to replace. Live and learn.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Hey I have a 2001 Oldsmobile aurora v8 4.0 trying to located my engine temperature sensor for my car n my o2 sensors also please help

Your Temp sensor may be hidden behind Your housing unit for the thermostat, and the O2 Sensor are alway screwed into the exhaust there is an upper and lower O2 sensor meaning Upper is up high on the exhaust near the engine and the lower one is down by the catalytic converter.
1helpful
1answer

Where is the o2 sensor 2 bank 1 on a 2003 olds aurora?

O2 (Oxygen) sensors are in the exhaust system.
0helpful
1answer

Where is the 01 and 02 sensors located on a 1999 isuzu rodeo?

I don't know what an "01 Sensor" is, but the O2 sensors which sense oxygen (O2) in the emissions are located on the exhaust pipes behind the engine and before the mufflers. If you have a V6 engine, there will be a total of 4 O2 sensors, 2 on each side of the exhaust system. You will need an open ended wrench to remove the old ones as you need to be able to get around the sensor and the wire that goes to it. Unplug the connector before loosening the sensor, it'll be easier than twisting the cable/wire until the sensor come out. You may need some WD-40 also to loosen up the sensor if they've been there a long time, but don't start your vehicle until the WD-40 or whatever you use dries off. It could ignite from the heat in the exhaust pipe when the engine is running.
0helpful
1answer

I got a 2001 Oldsmobile aurora that the code reads PO301

well that code means ur have a missfire in cylinder one change the wires for the spark plugs that really the only thing i can think off beacuse you have already done the spark plugs and the oxygen sensors and the coil packs
0helpful
1answer

How many o2 sensors have a 2001 Oldsmolbile aurora and where are located

4.0 engine or 3.5?
On the 4.0 there are 4 sensors, some up front between the engine and radiator, some between the engine and firewall.
Caution, I replaced all of mine to fix a problem because they weren't reading. None of them were bad. Turned out to be a cracked intake plenum gasket which was only $30.00 and a lot easier to replace. Live and learn.
0helpful
1answer
1helpful
2answers

01 olds aurora 4.0 low coolant light on. Where is the sensor located?

The coolant level sensor is inside the coolant bottle. It is not replaceable separately. You will have to replace the reservoir to replace the sensor.
1helpful
1answer

How many oxygen sensors are in my 95 oldsmobile aurora? and where are they located?

LOCATIONS There are different locations in the exhaust system where O2S sensors are positioned. The locations have been given numbers and will be used in the accompanying charts to identify the positions of O2S sensors in most vehicles. Due to mid-year production changes or factory inconsistencies, all models may not be covered. If a vehicle being serviced is not covered in the charts, inspect the exhaust system (while cold!) in the general locations to find the applicable O2S sensors. NOTE: If equipped with dual exhaust systems, there may be up to 4 or 5 O2S sensors in the exhaust system. Be sure to locate all of them before commencing with any testing or service. Fig. 1: Location No. 1 — down pipe or exhaust manifold 79248g01.gif
Fig. 2: Location No. 1 — typical O2S sensor located in the exhaust manifold 79248g04.gif
Fig. 3: Location No. 2 — left and right banks of a V-type engine 79248g02.gif
Fig. 4: Location No. 3 — exhaust collector (where more than one pipe joins together) 79248g05.gif
Fig. 5: Location No. 4 — outlet of the catalytic converter 79248g06.gif
Fig. 6: Location No. 5 — inlet and outlet of the catalytic converter 79248g03.gif
93068c01.gif
prev.gif next.gif
1helpful
1answer

01 olds aurora

bank 1 sensor 1 will be in exhaust manifold by firewall in the middle. bank 1 sensor 2 will be behind convertor .bank 2 sensor 1 will be in the front manifold down at the end of it
Not finding what you are looking for?

1,338 views

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...