1999 Ford Taurus Logo

Related Topics:

Anonymous Posted on Dec 09, 2008

I have a 19999 ford taurus and i need to get the belt on what is the trick

  • Marvin
    Marvin May 11, 2010

    no trick just follow the diagram that is under the hood. under the hood

×

2 Answers

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 72 Answers
  • Posted on Mar 08, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Mar 08, 2009
Answers
72
Questions
0
Helped
36468
Points
164

Use a 15mm wrench to turn tensioner bolt counterclockwise hold it there as you (if you're coordinated enough) or an assisstant helps you loop the belt around then relieve the pressure on the bolt . This car has an automatioc tensioner. no special tool is necessary..

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Dec 11, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Dec 09, 2008
Answers
1
Questions
1
Helped
68
Points
0

Had to buy a tool that was made to move the tension pulley so the belt would slid on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2004 Taurus serpentine 3.0diagram

Robert, Serpentine belt diagram. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Install Replace Serpentine Belt Ford Taurus 3 0L V6 1AAuto com
2003 Ford Taurus V6 3 0L Serpentine Belt Diagrams serpentinebelthq com
2003 Ford Taurus Belt Diagram Am Having Problem Getting My
0helpful
1answer

I need the location for a bank 1 sensor 1 oxygen sensor in a 19999 ford taurus

Bank 1 is the side nearest to the firewall and sensor 1 is pre-catalytic converter. It should be located on the exhaust pipe after the exhaust manifold and before the catalytic converter. Follow the exhaust pipe.
0helpful
2answers

I cant move the belt tensioner enough to get belt over alternator pully? Is there a trick?

Put the belt onto all groved pulleys first, then un-tension the tensioner/idler pulley and slide the belt onto it (the tensioner/idler pulley should be smooth with no lip for the belt to go over).
0helpful
1answer

I need instructions and a diagram to bypass the ac pulley when replacing the serpentine belt in a 2001 ford taurus.The belt broke, due to age and a frozen ac pulley. I need to know what size belt I will...

simple trick provided you can do this by running some twine around your pulleys allowing for1-2 inches less for slack adjuster an that will pretty close.or they may have for that system without ac meaning the condenser unit.
1helpful
1answer

Need a diagram to replace a belt for a 3.0

1999 FORD TAURUS - V6 3.0L 182ci GAS FI N S - Belt Routing Diagram
1b3b0ad.jpg


1999 FORD TAURUS - V6 3.0L 182ci GAS FI N U and 1999 FORD TAURUS - V6 3.0L 182ci FLEX FI N 2 -
7257c46.jpg


From DAYCO Catalogue.

Hope helped.
0helpful
1answer

Need diagram for 1999 Ford Taurus serpintine belt

it sould be located under the hood on the radiator shroud area
0helpful
1answer

Change serpentine belt and tension pulley and idle pulley and

could be the alternator, water pump
take the belt and spin all the pulleys and listen for noise and make sure they turn smoothly
another trick is to take a can of wd40 or equivalent and spray the bearings 1 at a time till the noise goes away or quiets down
2helpful
1answer

Air bag code

Hi, ON your 2002 ford taurus, The Flashing code 33 ( B 2292 )

This code refer to : Driver side seat belt pretentioner ( seat belt bucklet) problem.

Check the conecctions under the driver seat.
Repair as need, and recheck if thi code is present.

But if you had an accident on you taurus. You need to replace the Seat belt Pretentioner ( seat belt bucklet)

OK. I hope this information work for you.

Than's.
Not finding what you are looking for?

78 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...