Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jul 03, 2012

Fuse panel 1987 nissan 300 zx

Fuse panel diagram

5 Related Answers

Anonymous

  • 78 Answers
  • Posted on May 23, 2009

SOURCE: Nissan 300 ZX 1995. Passenger door handle - outside.

The door handle is held in by 2 10mm nuts. Pull the clear plastic back to see. They are a little tricky to get off but not too difficult. Don't forget to remove the rod for the lock cylinder.

Ad

Anonymous

  • 770 Answers
  • Posted on Nov 07, 2009

SOURCE: Need fuse diagram for 1995 nissan quest

Here is an owners manual file download for Nissan. Go to the vehicle and the year and download the entire manual. It will show fuse locations and the diagram of what each is for. Good Luck!

http://www.nissanextendedwarranty.com/owners-manual/nissan_owner_manuals.html

Anonymous

  • 70 Answers
  • Posted on Jan 26, 2010

SOURCE: Oil leak on a 199o twin turbo manual transmition

rear main seal is the leak to fix: drop transmission remove clutch, drop oil pan and replace seal. seal is about 30 bucks, if your not auto savy id let a shop do it.. prolly around 800 tho...

Anonymous

  • 202 Answers
  • Posted on Apr 13, 2010

SOURCE: NEED KEY CODE FOR 1993 NISSAN 300 ZX, NOT IN GLOVE

try go to the dealer, take the VIN#

jturcotte

Jeffrey Turcotte

  • 8991 Answers
  • Posted on Dec 13, 2010

SOURCE: where can you find a diagram of the timing belt of

I'm assuming you have the VG engine. If not or you have more questions, please get back to me.

jturcotte_494.gif

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Torque specs on a 1987 Nissan 300 zx 2+2 plenum

If you are referring the the collector the specs are:
Collector cover: 4.3 - 5.8 ft lbs
Collector: 13-16 ft lbs

You should use a torque wrench that is sensitive at low torques. I bought an "inch pound" torque wrench for delicate items like injectors and just convert the foot pounds to inch pounds.
0helpful
1answer
1helpful
1answer

What make all the lights go out on 1987 nissan zx

My guess would be one of the main fuses for the headlight switch, or the headlight switch itself.
1helpful
1answer

Identify imobiliser on nissan 300 zx

It is built into the main engine control processor called the PCM and it talks to other modules, so it is not just one part.
0helpful
1answer

I need a fuse box diagram for a 1986 nissian 300 zx

hi there this website may help you http://www.300zx-twinturbo.com/cgi-bin/manual.cgi
0helpful
1answer

1987 300 zx starts the quits after 2 minutes and won't start again

probally crank sensor. starts then stalls after driving a few min. then won't start for awhile. u can actually check it on the ecu. 4 green lights then 4 red lights. if you can't run the comp check on ecu let me know i'll look it up its been awhile had same prob years ago all my sensors are new
1helpful
1answer

I have a 87 nissan 300 zx and the alarm is keeping the car from starting what should I do

Locate the alarm power wire and trace it from the alarm to the power source it is connected to and remove the fuse from the line or cut the line. If that resolves the problem the alarm is at fault. If it doesn't locate the kill switch and replace it.
0helpful
1answer
1helpful
1answer

Need to increase the idle on a 1987 Nissan 300 zx non turbo. where is the "idle screw" or equivalent

Remove plug from air flow meter(air filter box) and adjust there. It will be on the top.
Not finding what you are looking for?

93 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...