How do you know where u need to replace the timing belt

Nancy, the Honda recommendations are to change belt 100,000 Km/ 60000 miles or every 7 years which ever occurs first. So if timing belt has not been changed, YES change it. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Frequently Asked Questions FAQ Honda Owners Site
https://www.angieslist.com/articles/do-i-really-need-replace-my-timing-belt.htm
1998 2002 Honda Accord Timing belt replacement with water pump

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

1) Belts: Timing belt, alternator belt, A/C belt, power steering belt.
2) Water pump and seal.
3) Timing belt tensioner- option.
4) Front crank oil seal-replace if oil is leaking.
5) Two camshaft seals-replace if oil is leaking.
6) Instruction on how to install the timing belt.

Timing belt and water pump would be a wise repair procedure and great insurance to keep this vehicle running as it should.

The timing belt should have been replaced at the 105K service. Someone should look at the timing belt to determine the condition. However, if you have any doubts, you should replace it to be on the safe side. Also replace the mechanical tensioner.

Hello michele151: My name is Roger and I will answer your question. The manufacturer recommends replacing the belt at 60,000 miles and inspecting the belt at 30,000 miles. This would also be a good time to check the water pump as the timing belt turns it also. I always recommend replacing the timing belt with a timing kit as this way you also have the parts to replace the idler bearings at the same time. these are small bearings that turn a million times and do wear out. Should you need further help please just ask. Please rate the answer as this way I know it was of use. Thank You for using Fix Ya. Roger

The interval for replacement is 60,000 miles on that model.
If you do not know the last time it was changed, it would be a good idea to do it so you do not risk getting stranded.

The engine is NOT an interference engine, so the engine will not be damaged if the belt breaks; you will just need a tow truck to get it somewhere to install a new belt.

You need to find the timing marks on both crank and cam pulleys, set it, then take of the belt ane dont let any pulley move! Put on new belt and set the tension of the belt.

I want to know how to set point

You have to remove the timing belt cover and slip off the old belt...The timing spec adjustment is: 10-15 degrees BTDC