Please help how can i program remote control for mazda mpv 2002
it's a car with dual power door
Courtesy of: forums.mazdaworld.org
Try this, it works on several 2002 models:
Step 1: Open drivers door and leave open.
Step 2: Lock and unlock the drivers door using the power door lock switch on the door.
Step 3: Insert key into the ignition.
Step 4: Turn key to on position and return to off position. (IMPORTANT
- use ON position NOT ACC position). Do this 3 times within 10 seconds.
Leave key in the ignition.
Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).
Step 6: ECU should respond by locking and unlocking the doors.
Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.
Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.
Step 9: Remove the key from the ignition and the ECU will respond a
final time with a series of door locks and unlocks. You're done
Hi I have a 2002 Mazda MPV mini van my remote alarm use to work but they stop working I did the and the alarm remote doesn't work still I replace battery still don't work
Hi im having a problem with my alarm when i bought it only worked with using the key but i had to remote, i replaced the battery and followed the steps shown here and still not working any answers??
2,951 views
Usually answered in minutes!
My Mazda MPV 2002 stopped acceleration beyond gear one. Also it goes off randomly when I accelerate or step on the brakes.
×