How do I instal regulator on 1994 hyundai excel

SOURCE: need timing diagram for excel 1994 plz

Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.

Josue Almodovar

• 298 Answers
• Posted on Sep 02, 2009

SOURCE: how d i change a clutch in a hyundai excel 1994

Hi first lift the car and be sure to secure the car that it wouldn't fall when your under the car, remove the wheels then disconnect the negative cable from the battery remove the axles, remove the transmission mount, remove the starter, remove the bolts around the transmission housing once you remove the bolts use a floor jack and put it under the transmission then use a prior and separate the tranny from the engine and bring the tranny to the floor now you have the clutch expose remove the old clutch and pressure plate and pilot bearing now do the same thing in reverse good luck

SOURCE: Hi ihavea1996 hyundai excel, 3dr

does it have power windows? if not remove window crank and lower seat cushion,then the panel,some specialty tools are required.If I remember right the regulator is held on by rivets..wilfy

SOURCE: how and were installed electrical fuel pump in

one is in the tank one is under the tank