2001 Pontiac Bonneville SE, wipers won't go to rest postion.

Question edited for clarity. Part of duplicate question added.
Duplicate question deleted.
Question moved to model category.

This says Pulse Board or the Switch

https://www.google.com/search?q=2004+Pontiac+Montana+front+wipers+won%27t+turn+off

This says it does have a relay... but

https://www.google.com/search?q=2004+Pontiac+Montana+wiper+relay

Nothing shows where it is located.

https://www.google.com/search?q=2004+Pontiac+Montana+wiper+relay+location

Relay here

https://www.autozone.com/electrical-and-lighting/wiper-motor-relay

It may not be releasing, you can test if you can find it!

https://www.autozone.com/electrical-and-lighting/wiper-motor-relay

..

Windshield wiper motors are generally easy to replace. You need to remove the windshield wipers and take off the small grill panel above the hood and under the windshield. You should see the motor in there. It simply unbolts and unplug the electrical connector and replace it with a new one.

u need a new parkpawl witch is mounted on the wiper motor. wiper linkage connects to it.

It can be faulty wiper controlling switch or the wiper switch wires are shorting.

There are few solved solution help links related to wiper problem on various car brands and models.Select the required links and go through its troubleshooting procedure.
------------

1993 Ford F350 wipers not working?

http://repairhelpcenter.blogspot.in/2012/02/1993-ford-f350-wipers-not-working.html
--------- How to Replace a Windshield Wiper Motor

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-windshield-wiper-motor.html

--------
Wipers not working, but hear relay click on Lincoln LS? http://schematicsdiagram.blogspot.com/2011/12/wipers-not-workingbut-hear-relay-click.html
--------- Car windshield wiper gets power for movement and stops?

http://schematicsdiagram.blogspot.com/2011/12/car-windshield-wiper-gets-power-for.html

---------

How does cars Windshield Wiper System Works

http://technoanswers.blogspot.com/2011/11/how-does-cars-windshield-wiper-system.html

--------

1997 Honda Protege: Replace Wiper Transmission? http://technoanswers.blogspot.in/2012/06/1997-honda-protege-replace-wiper.html

-----------
For more help,keep updated.
Thanks.

this tricky cause both ur wiper stalk and wiper mafuctioning can cause this ur wiper motor has a pulse board on it probrably be first thing to replace check out rockauto.com theyre the best and cheapest on parts

remove the bolt and unhock the linkage, next turn on the wipers and then turn the wipers off, this will park the motor , you will then postion wipers in the park postion and put linkage on the motor, this will line the wipers up, good day.

Remove the arms,and place them back on where they need to go,do not turn the wipers on,do this as they set now.If the wiper blades when turned on go off the left side of the windshield ,then you will have to remove everything again,and move the wipers down in the rest position,and align everything up to the rest position,with the wipers at rest,and the motor at rest.

On your wiper switch you have a park position and on your wiper motor the same.It takes a little experience to mess with this problem.
without looking at it I would say your switch is no working allowing the arms to rest in the park position.

if you had your windshield replaced they may not have been put back on in the proper location

its the fuse inside the fusebox under the hood. the box is right in front of the battery. I had the same problem. 4 dollar part. look it up in the owners manuel and your good to go.