- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It does indeed have keyless entry. It needs reprogramming when you get a new remote. Also if you disconnect the battery. Usually a local car alarm fitting shop, or an auto-electrician will do it. Plus of course a Ford dealership.
Dec 30, 2010 - CHEVY KEYLESS ENTRY ... 2006-2007 Chevrolet Impala, Monte Carlo ... Remove the clips holding the RCDLR antenna wire at the RCDLR module and along the "A" pillar. 5. ... Connect the new antenna to the RCDLR antenna module. 11.... The existing antenna is grounded into another wiring harness.
May 24, 2007 - 2006-2007 Chevrolet Impala, Monte Carlo ... Remove the clips holding the RCDLR antenna wire at the RCDLR module and along the "A" pillar.
Do you still have both cars? If not, you don't have to un-program the remote to use it on another car.
If so, then simply reprogram the remotes you want to use on the 2000 chevy and then when you are done only the ones u just programmed will work on it, then simply repeat the process on the 2004 chevy truck.
you need to call the nearest chevy dealer with you vin, and get the part number from them, there are 2 numbers on the back of the remote, see if they match what the dealer tells you. Have an automotive locksmith program, should cost about 75.00 to do.
•
Resynchronization may be necessary due to the security method used by the remote keyless entry system.
Resynchronization may be necessary due to the security method used by the remote keyless entry system.
The transmitter does not send the same signal twice to the remote control door lock receiver (RCDLR).
•
The RCDLR will not respond to a signal that has been sent previously.
This prevents anyone from recording and playing back the signal from the transmitter.
•
Resynchronization may be necessary under the following conditions:
-
The battery in the transmitter is very weak.
-
The battery in the transmitter was replaced.
-
The battery in the vehicle has been in a low or no charge condition for an extended period of time.
•
In order to resynchronize the transmitter with the RCDLR, perform the following steps:
1.
Stand within 1.5 m (5 ft) from the vehicle.
2.
Simultaneously press and hold the LOCK and UNLOCK buttons on the transmitter for 7 seconds
×