The engine in this car is full;y electronically controlled by a computer (called the PCM), when a problem like this occurs a fault code is recorded in the history memory of the PCM, so what must be done now is to have the fault codes read with a tool called a scanner, once the codes are known a trained tech will do the appropriate diagnostics from the factory repair guide and then replace or repair the affected system of the electronics that has caused the no spark condition (in your particular case). I absolutely do not recommend any parts being replaced until all the information on the problem has been gathered.
You will need to have a wiring diagram of the system components you mentioned. You can get that here I am told. www.alldatadiy.com There is a subscription charge for the use of the site.
×
Car
not starting or turning over indicates towards multiple possibilities. It can
be issue with battery or weak battery. But if battery checks out ok, then it
can be starter issue or faulty alternator or problem with low fuel pressure or
no spark at spark plugs due to dirty spark plugs or faulty ignition
coil or injectors getting cracked or dirty and needs to be cleaned.
To
confirm the problem, the basic troubleshooting is required.
Click
this link below and follow the troubleshooting:------
http://technoanswers.blogspot.in/2012/02/car-starting-issues.html
---------
This will help.
Thanks.
428 views
Usually answered in minutes!
all ready read all codes no codes came up everything works on car but no spark at coils or power going to coils
×