I replaced both sensors for service engine light on problem. It seems to have fixed the problem. However I am now getting an intermitted problem where the car wants to stall. The service engine light comes on but does not stay on and there are no errors code stored. Any ideas?

SOURCE: Error Code P0128 service engine light comes on intermediately

replace the thermostat.

Jim Goldsmith

• 2005 Answers
• Posted on Jun 01, 2009

SOURCE: 96 Dodge Intrepid ES, engine stalls

Find your firewall electrical junction block (where all the wires enter the cabin on the passenger side) and with a zip tie pull up the wire bundle so it does not ride on the upper tie rods and, fasten the zip tie to anything that is solid in the engine compartment and, let me know what happens

SOURCE: I have a 2000 buick lesabre. The fix engine soon

It NEVER was the camshaft sensor! Unless, you've removed the engine lately, which I doubt.
RUN to Advance Auto Parts and buy a can of "SeaFoam" and add to your gas tank per instructions...drive at least 100 miles and the problem should go away...IF it doesn't you'll have to replace the O2 sensors in the exhaust system...Any good mechanic should be able to do this for much less $$ than the dealership DO NOT go to the dealer for repairs!
Good Luck

SOURCE: 95 volvo 940 jetronic error codes 113 212 232

Change the the O2 senor on the catalytic convert. Its probably dead.

SOURCE: mitsubishi lancer service engine light comes on and rpm's high

same as mine
2000 Lancer cedia