I have a 2002 mercury sable and the heater want get hot. i have replaced the therostat,flushed radiatorand had the heater core blown out. all long as the blower fan isn't running you can feel hot air, but as sone as you turn the fan out it blows cool air. i have made sure the air condition isn't on. what esle can i do
You have a broken or stuck temp blend door in the heater case. or the servo motor is broken. this sits on top of the heater case
Pull glove compartment box out remove blend door actuator actuator and positioned or too hot side
If you need further help, reach me via phone at https://www.6ya.com/expert/james_9c1b039055413ffa
Check blend door operation
3,568 views
Usually answered in minutes!
thank you very much i'll try this....cross your fingers
i have an 02 sable gs with simaler problem i turn on fan and it blows hot for 15 sec or so then right to cold i have replaced water pump, thermo, and tried to reverse flush core
i have the same problem with my 2000 sable, i changed the thermosate,flushed the radiator and heater core. also checked the blend door and servo they are fine, what else could it be
cooling fan sensor
I replaced my radiator cap the thermostat and I know the cooling fan runs. It still gets hot. In fact its worse
Replaced thermostat, radiator cap, the cooling fan runs because I hardwired it.
i replaced water pumpand removed the thermostat completely from the system , i drained it and added a flush but im still having it over heat and some how the heater is still blowing hot air out with no thermostat
×