Put key into ignition and tried to turn steering wheel but it wont unlock
SOURCE: Ignition Key Won't Turn
This is a trickey one, you have to shake the steering wheel, Left & right sideways,While holding the key over. You may need help with this.
SOURCE: 98 Toyota 4Runner ignition switch won't turn
turn key toacc using pick release ign cyl start car w long pliers while having locksmith repair cyl
SOURCE: locked up steering wheel
With the key in the ignition, tap on the key with something heavy like a pair of pliers, screwdriver etc. It will cause the pin inside the mechanism to drop, and the iginition will turn. Happened to me today, worked like a charm.
SOURCE: Need to replace the 1995 toyota corolla ignition lock cylinder
You need to pull the plastic covers from above and below the steering wheel off. Then put your key in the ignition and turn it to the acc position, then there is a small button either on the top or bottom of the tumbler assembly, it will be inset and you will need a small pointy screwdriver or something to reach it. When you push the button the ignition assembly and the key will come out together
SOURCE: locked steering wheel
Something wrong with your Ignition key barrel,
Ignition key barrel jam in place.
or
Could be your anti-Theft System failed (including, but not limited) fuses, wirings, etc. If you have one.
or
So check the fuse boxes (one in the cabin & the other in the engine compartment).
To see if there is any burned fuses.
See Fuse Boxes:
See in the plastic cover, a plastic fuse puller ( use it to pull the fuses) once a time & check NOT burn.
If locked in place; do these steps:
1 - Juggle it several times in a very soft & slow burst.
2 - Juggle (Shake) the steering wheel RH & LH,
several times in a very gentle & slow.
3 – Try to remove the ignition switch
4 – Search the internet Google, www.about.com, www.youtube.com/video
For clues to help you sort out your problems.
Regards;
MAR
670 views
Usually answered in minutes!
×