SOURCE: Timing belt. 1990 2.3 liter 4 cyl. Crankshaft
there should be a mark on the crankshaft pulley there should be a mark on the camshaft pulley and they should line up but to be sure bring the motor to tdc then line your mark up on your camshaft
SOURCE: change my timing belt valves got bent shop said was carbon
nO! dont get scammed they messed up and had the timing off and it fired your valves off at the wrong time and bent them dont take it to anyone else ...take it to the manufactures and let them know what happened and i would get in touch with the BBB.... see your timing belt turns your camshaft which turns your pistons up and down now if you timing is off your piston will go up at the wrong time and force all that combustion back at your valves which are made up of light metal and then they bend .....call the garage you went to and let them know that it was there fault and you want it fixed ......this really makes me mad being an mechanic myself. I hope this helps you a little.
Testimonial: "THANKS FOR THE INFO CAUSE THATS EXACTLY WHAT I DID THIS WEBSITE IS SO INFORMATIVE THANKS TO PEOPLE LIKE YOU ..THANKS A BUNCH .."
SOURCE: broken Timing belt on peugeot 106 1100 cc will valves & pistons
i presume its a tu engine!? these are very good engines and have been known to survive a broken cam belt. i would try one on it before replacing any valves mate
if this helps let me know
cheers
big mike
SOURCE: Am Replacing Timing Belt On 1990 GEO Tracker 4x4
most of the time there will be one mark on the crank pulley gear and the one on the cam pulley gear.usually a dot or a straight line.
63 views
Usually answered in minutes!
×