Remove the belt.then remove the bracket for the belt tension. then remove the bottom alternator bolt. pull alternator up to top of radiator.may need to remove upper radiator hose and cooling fan assembly to get enough room to get the alternator out.
SOURCE: Mercury Villager headlight assembly diagaram for removal
This is easy. Lift the lid open. Look at the back of the sealed beam and you will see a clip and an o ring. Pull the clip up and pull wires back toward the driver's seat. Unscrew the o ring and firmly pull the bulb out toward the driver again. Note the 3 tabs on the bulb seat and realign the new bulb with those tab ( 2 bottom, 1 top). Replace with #9007 bulbs..do them both.
SOURCE: Rear seat removal 2000 merc Villager
fold top seat down first
then there is seat clip push seat forward with upward motion
this releases back floor clamps once released pull seat back this releases the front clamps then pull seat out of back door
SOURCE: 1999 mercury villager brakes lights
check the brake light switch. It could be defective and it costs less than $30 and easy to replace. Buy an OEM from the dealer instead of a $10 one from the auto parts store. It is located above the brake pedal.
SOURCE: 1999 MERCURY VILLAGER fuel pump location
The mechanical fuel pump is located on the engine block or on the cylinder head.
G
SOURCE: broken spark plug removal from 1999 mercury
if you can get a plug socket on the sparkplug proceed as usual.
860 views
Usually answered in minutes!
×