1995 slt dodge dakota 3.9L, one cylinder not firing.
SOURCE: 1994 dodge dakota firing order diagram
Does it have the firing order embossed on the intake manifold?
SOURCE: brake problem with a 1995 dodge dakota
have you checked the power booster and the master cylinder> what about the wheel cylinders> have you looked at them to see if theres a leak somewhere?
SOURCE: Adding Freon to 1997 Dodge Dakota SLT
You can purchase R134a cans with a built in gauge so you don't overcharge... Assuming the system has not completely discharged, usually a can or less will do. Here is a link with some basic instructions:
http://www.sadik.net/nissan/howto/ac_r134.htm
SOURCE: trouble code po572 on dodge
P0572 - Cruise Control/Brake Switch A Circuit Low
Switch number 1 on the cruise brakes has low voltage on the circuit. Or
how about low voltage on your brake line switches or something? Check to see if inadvertantly the connection to the actual pressure
switch (one for front & the one for the rear) may have pulled loose
at the switch. These are located in the Hydrolic fluid line... Trace
from calipers back. (Two wire connection).
Tell us news.
403 views
Usually answered in minutes!
×