In the last 3 or so years, things started not working. Now some things do and others dont. In a few months or so, that will change as it has before. I know the BCM operates a lot of the things and would like to know if there is anything/ any way to check it. I cannot change the security settings because the door lock button does nothing. Now the drivers window will not work. You can hear it trying to go up, but nothing on the down side. Getting frustrating..
Yes , but it involves taking the vehicle to a chevy dealer ! They would hook up the GM factory Tech2 scan tool . See if any codes are stored ,see if it will communicate with the tool . Should only cost about $26.00 buck .This isn't something for a non trained service tech. to mess with. The window not working is more then likely the regulater binding up . Would need to take door panel off to see what is wrong .
How To Install Remove Door Panel Chevy Venture Pontiac Montana 97 05...
How To Install Replace Power Window Motor Chevy Venture Pontiac Montana 97...
SOURCE: 94 Chevy Camaro-won't start
I would say you would have to take off the inside door panel and remove the mechanism and security switch to see why it is jammed in a locked position, even though you have unlocked the door the electric switch {maybe rusted} is still signalling a lock position, the switch may be located on the actual key barrel, but same check to see why its not moving into an unlock position.
hope this helps.
SOURCE: Venture van power door problem
It sounds as though one of the proximity sensors is faulty. Also try giving the tracks for the door a good shot of white spray lithium grease. The door may be binding enough so that the emergency reverse is kicking in.
98 views
Usually answered in minutes!
Have tried the battery disconnect. Nope!. Don't really believe the window prob is tied in with the rest. Thinking it is the BCM but do not want to spend the money changing parts, would rather be sure.
As far as the kids and chocolate etc.... none here, diaper duty is long over.
×