The bottom cushion pulls up with a finger tab located on the rear of the cushion by the door. Then there is a release lever located on the top of the back rest next to the head rest. You will need to remove the head rest for the seatback to lay completely flat.
SOURCE: 2001 jeep grand cherokee seat removal
i actually removed my 2 front seats very easily as a novice. There really is only i think 4 bolts that need to come out 2 in front and 2 in back. If i can remember correctly i believe it was a larger metric size. Although i dont have power seats, if you do just look for the clip connector and disengage
SOURCE: 2002 jeep cherokee laredo
the only problem that vehicle has is with cooling fans is relay/module or electrical harness to module that burns up located behind and under right front headlamp assy must remove headlamp to access relay/module that is what powers up fan motor module assy.
SOURCE: 2001 Jeep Grand Cherokee Laredo....power
I have a 2000 Jeep Grand Cherokee the power windows,power seat , door would not lock , and the inside lights would stay one ..i thought it was a fuse problem but no fuses for that ... in the rubber boot between the door and frame ..the was the ground wire was split ... put a **** connector on it everything works great now ....
SOURCE: how do i program a keyless remote for my 2001 jeep
Review this information:
- Self-Programming Sentry PROGRAM
- RKE (Remote Keyless Entry Trasmitter)
Good luck... and remember rate my help!!!
SOURCE: fuse box diagram for 1995 jeep grand cherokee laredo
look on the net that is where i got mine
4,295 views
Usually answered in minutes!
×