Rear defroster doesnt work also locks/key fob doesnt work.

Marvin

• 85242 Answers
• Posted on Oct 16, 2008

SOURCE: key fob will not undo

If you don't have one that works for the vehicle now, you'll have to take it to your local dealer to have it programmed to the vehicle. Some will charge for this, some will do it at no charge.

If you do have a remote that is programmed and working for the vehicle, then the following steps will allow you to program another remote:

1. Enter vehicle and close all doors.

2. Put seatbelt on (or clip it into the buckle) to shut the warning buzzer off.

3. Put key in ignition, turn to run position but don't start it.

4. Press and hold the unlock button on the working key fob and hold for 4 seconds, then also press the panic button.

5. Release both buttons and you should hear a single chime to indicate it is in program mode. You have 30 seconds after the chime to program any additional remotes you want to program.

6. Press and release both the unlock and lock buttons simultaneously on the remote you are programming. You should hear another single chime.

7. Within 4 seconds after hearing the chime, press either lock or unlock button on remote that you are programming.

SOURCE: HOW DO I GET TO THE BATTERY IN MY 1999 CONCORDE LXI

The batery is located in the right side finder. You have to pull the wheel and you will see the cover for it toward the front of the car behind the head lite. its not fun. Good luck

SOURCE: i have a grand voyager

dont go through all the hassles of removing the door trim just take the terminal off the battery for about a minute then reconect again worked on mine good luck

SOURCE: 2005 Chrysler Grand Voyager. Central locking

the body control module may need a software update..check with your local dealer

SOURCE: i got an 01 concorde LXi 3.5 L need oil pan

what kind of oil dos the 2001 chrysler concord take?