At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I started the car went inside came back out it stalled.Now it cranks but wont start.Replaced the ignition control modual a month ago.Car ran fine earlier that day.
Car was running then turned it off for a few minutes and went to start it back up and car will not crank over. Doesn't even make a noise.Car was running then turned it off for a few minutes and went to start it back up and car will not crank over. Doesn't even make a noise.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
sec life ?????? SECURITY LIGHT ? anti-theft system problem .
The Pass-Key II® Theft Deterrent system prevents vehicle theft by disabling the starter motor and fuel system. If the Body Control Module (BCM) dose not identify the use of the correct ignition key to start the vehicle, the (BCM) will communicate a message to the Powertrain Control Module (PCM) which will disable the crank relay and fuel delivery to the engine.
When the (BCM) identifies the use of the correct ignition key (resistor pellet) to start the vehicle, the (BCM) will send a fuel enable and starter enable message to the (PCM) which will allow the vehicle to start.
Is your SECURITY light flashing? If so, you have a V.A.T.S. problem. VATS stands for Vehicle Anti Theft System. Try getting a new ignition key made because the resistance value has probably changed in the one you have. If that doesn't do it you'll need to get a VATS bypass.
I had the same problem with my 98 regal. I replaced a wiring harness on the steering column that has heavy gadge wires coming from the fire wall and going to a small black box directly below the ignition switch.Since I replaced it I have not had any problems
most likley a fuel pump issue. The only way to know for sure is hook up a pressure gauge and when you have symptoms check the pressure. If you spray some brake cleaner or quick start when it doesnt start and it does start then this is an indication of a failed fuel pump or fuel pump relay. If it still does not start when you spray then you have an ignition issue like a crank sensor or ignition module.
Car was running then turned it off for a few minutes and went to start it back up and car will not crank over. Doesn't even make a noise.
×