Need a picture of diagram to replace a belt on 2000 windstar

SOURCE: 2000 Ford Windstar serpentine belt routing

i hope u have a 3.8L
Jay

SOURCE: i need the serpentin belt diagram for a 2001 ford

Here you go:

SOURCE: 2004 ford freestar serpentine belt diagram

There is a diagram under the hood showing how
the belt fits over all those pulleys. It's either on the
hood itself or on the chassis near the hood pin release pin.
JB

SOURCE: serpentine belt replacement

2.0L Engines
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C Fig. 12: Drive belt routing-2.0L SOHC engine without A/C Fig. 13: Drive belt routing-2.0L DOHC engine

SOURCE: I need the diagram for the serpantine belt on a

Click on the following free direct Link. It has the correct Serpentine/Drive Belt Diagrams for your 1997 Ford Windstar with the 3.8L V6 Engine. The Page of Diagrams on the Link also has the 3.0L Engine Diagrams, and included the various engine options (AC, No AC etc.). AND it has additional informational and directional diagrams that will be very helpful to you in the future.

http://www.2carpros.com/car_repair_information/year/1997/make/ford/model/windstar/1997_ford_windstar_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!