1999 civic key wont lock door or unlock it

Auto Repair : Power Door Lock Troubleshooting

sofia2013.com/auto-repair-power-door-lock-troubleshooting/

Jul 29, 2014 - can't use the key i have to go through the passenger door and unlock it ... when I get out of my 2003 Honda Accord, and leave the keys in the ignition, ... Any ideas why all the doors wont lock even pushing the lock button in the

Remote won't unlock passenger or rear doors - TDIClub Forums

https://forums.tdiclub.com/showthread.php?t=355194

Jun 4, 2014 - Will unlock the drivers side door and rear hatch (wagon). ... Any ideas, ... I have the VCDS and tried to program the remote with no success. ... precisely, but it was something like put the key in ignition, turn to acc, then push the unlock button. .... fiddling around with passenger door did not produce any result.

Door locked with key in ignition - TDIClub Forums

https://forums.tdiclub.com/showthread.php?t=125387

Dec 17, 2005 - Anybody have any ideas on this? I know there should ... The door willlock with the key in the ignition and the car running. It does automatically ...

Ignition key won't open door - 8th Generation Honda Civic Forum

www.8thcivic.com > ... > Mechanical Problems & Technical Chat

go to police or lock smith and either can unlock door but you still need to fix door lock maybe locksmith can fix.or dealer.

To fix the tumblers, find a trusted locksmith. That's the way I'd go. Honda does have a kit, but, it's not a consumer one. You'd spend a decent amount of money on a kit that would fix hundreds of cars, so, that's why they won't sell it to you.

As for the key fob, have you tried putting a new battery in it? Your description is not very clear. The LX should have come from the factory with a key fob. So, if you got one, make sure it's the correct one with a good battery. To program it, put your key in the igntion, turn the key to position 2 (the position right before you start the car), press a button on the key fob, turn the key back to position 0, Repeat these steps over and over (about 4 to 5 times) until the doors lock/unlock. If that doesn't work, you could have a bum transmitter.

If some doors are not lock/unlocking, chances are bad doorlock acuators.

Your problem is not descriptive enough. Has it always been like this or just started happening? If it has always been like this, there is a possibility of a faulty lock OR someone has the door lock replaced and in that event, a new one from Honda comes with a new key that is different from the one for the ignition and the trunk and the glove box. Please provide more details.

change battery in remote

the solenoid may be weak, or it can be lubed. you will need to remove the door panel and see how it works, and try to lube it, or see if there is any binding.

I believe your problem is directly related to the elecrical contacts in the door key lock itself. I understand that the door locks but wont unlock. If the switch in the lock tumbler it self is not defective you may have other electrical problems in this circuit. do you have the same problem on the passenger door or is it specific to the drivers side only

check fuses and relays
swith may need replacing

ok here is the porcedure that i have for it

Remember , these steps must be preformed within 5 seconds of eachother also all doors should be closed, radio and lights turned off

im not sure what you mean by a bypass, you can always just not use the remotes and go into the body control computer and turn off keyless entry

1) Unlock Doors
2) Turn ignition key to "ON" position (II)
3) Press the "LOCK" or "UNLOCK" button on the remote
4) Turn the ignition key to the "OFF" position (0, I)
5) Turn the ignition key to the "ON" position
6) Press lock or unlock
7) Turn key to off position
8) on position
9) lock or unlock
10) off position
11) on position
12)lock or unlock - doors should cycle to indicate successful programming. If you only have one remote, turn ignition to off or don't touch anything. if you have 2+ remotes, go to 13:
13) lock on each transmitter that you need to program

*Steps 2-12 must be performed within 5 seconds of each other. Step 13 can be performed within 10 seconds of step 12.

is the lock mechanism siezed,or is the linkage disconected?