My key got stuck in the lock position and it wouldn't come out. so somebody took the whole thing out including the ignition power thing thAT turns it over.the white thing I don't know what it is called and it would go to start but it sounded like as if you were jus holding the key down to start it. so I bought another ignition switch and I need the diagram to learn how to put it in
Https://www.youtube.com/watch?v=w4oJhsUo9Wc
maybe this will help
http://www.partsgeek.com/mmparts/ignition_lock_cylinder/toyota/avalon.html
SOURCE: replacement key for 1998 toyota avalon
key is worn down go to a locksmith and have a key cut by code
SOURCE: 1998 Toyota 4Runner ignition switch trouble, 140k miles
Your tumblers are probably worn to the point were your only soluation is to replace the ignition switch
SOURCE: 1998 Toyota Avalon with power door locks, front
Check this site out
you need the passenger side door lock assembly kit.
There is one posted for sale in the US on this site. just scroll down for the following information and link
Used 1998 Toyota Avalon passenger door lock assembly
1998 Toyota Avalon
passenger door lock assembly
this is the part that surrounds the lock driver side. Car color is green
cary, North Carolina 27513
The solenoid or actuator arm for the door lock assembly is probably not working to full spec.
Hope this helps.
SOURCE: Removal of 1998 toyota cressida ignition key cylinder.
This car has drillable shear pin screws on the bottom of the lock yoke you must drill these out.
then release the clip to the cylinder. you must get a new set of break-off shear pin head screws from the dealer to finish the job.
793 views
Usually answered in minutes!
×