Send request for this information to [email protected] remind me where the question is from here on the site and state you need the Instrument cluster removal and installation documents for your 2007 Honda.In where the email Subject line is use 12004 this gives me a number so that others just viewing the site can not falsely ask for a free document and did not actually post on or use our site. This site limits the size of data i can give you, which is much more than i can leave on here or send on here. We will talk from email what you are to do when you contact me. Thanks for using FixYa we look forward to helping you.
SOURCE: 95 honda civic speedometer usually doesnt work
follow the cable under dash to speedomter it my be loose
SOURCE: speedometer erratic...replaced fuse and was ok for
Hi:
Your speedometer is driven by a speed sensor that is on the top side of the transmission. It would be worth your trouble to locate it, and unplug the electrical connector to see if it is clean and connected well. If everything looks ok, you are down to it or the actual speedometer unit.
Usually, if the transmission speed sensor is bad, you have other driveability issues too, so you might have just a minor problem.
SOURCE: Honda civic 2007 The digital speedometer is
if your speedometer is working,and the odometer is not,you will need to have the odometer replaced for it works off the speedometer
SOURCE: Honda Civic 2007 Civic . Cahange wheel bearing and
sorry to tell you this but it sounds like the wheel bearing was put in backwards on one or both sides. the front wheel bearings have a black speed ring built in and that is what your speed sensor reads off. - this is common as the front bearings will install either way- hope this helps
SOURCE: how do you remove and replace windshield wiper
If your arm looks like a hook (which it should), once you find and press the little tab and then jiggle the wiper and firmly pull towards the open side of the arm hook, it should come loose. You will probably have to rotate the blade to the side to make space to clear the hook (sometimes the hook flexes the blade a bit which is ok). Be careful not to bend the arm but be firm.
FYI, All new replacement windshield wiper blades come with step-by-step, illustrated instructions. Fon't have anxiety about it - I highly recommend getting the wipers in your hands and physically take a look.
Lastly, make sure you get not only the right length of replacement wiper, get the correct attachement. If you always use the application guide, you will get both: attachement and length. The application guides are at the store or you can go online to look them up (google something like lookup wiper size).
Hope this helps,
Jeff
1,134 views
Usually answered in minutes!
×