CAN YOU SUPPLY A SCHEMATIC DIAGRAM FOR THE pLYMOUTH pROWLER 1999 RADIO AND THE POWER AMPLIFIER?
SOURCE: remove the rear bumper
Removing Prowler Rear Bumpers First remove the four 10 MM bolts holding the trans cooler and drop it down. Support it by attaching one bolt to the lower hole on the cooler frame. This will keep the weight off the lines. This takes two min. and allows easy removal of the elect. lines. Then remove the four bolts on each bumper. The bolts are 13MM and 17MM. You will need a ratchet, sockets, extension and a 13MM open end wrench. If you remove the rear bumpers, you should replace the rear pan with one of the aftermarket ones otherwise you will have big holes staring at the people behind you. Go to prowleronline.com and check the vendors for a couple of options. Maybe you are removeing them to paint and reinstall. Look at this link for some options .. Mine is the 7th post down. http://www.prowleronline.com/ubb/Forum1/HTML/014949.html Hope this helps.
SOURCE: 1999 Plymouth Voyager engine compartment fuse/realy diagram
I have to assume you have lost the cover for it, as the schematic/Map, is on the underside of it.
77 views
Usually answered in minutes!
×