SOURCE: fan control relay
Quite often you'll find resistor on firewall, of passenger side under hood. 1-1/2"x3" block attached to firewall. In area of where heater hoses enter.
SOURCE: where is the relay located for the turn signals on
your fuse block is located behind the steering column cover acessible by removing the fuse access panel above the hood latch release lever.the relay and flasher module is located behind an access panel in the glove box.included in the module are hazard and turn signal flashers along with time delay and horn relays.you have additional relays mounted on the inner fender panel near the battery and strut tower.
SOURCE: How do we fix a signal flasher on a 1990 plymouth
If not in fuse panel area under dash on drivers side near hood pull cable, then check behind glove box.
SOURCE: 1992 Plyjouth Sundance turn signals won't
Hi There are various reasons that the turn signals might not be working. First of all check your fuses to make sure none of them are blown; next, check your bulbs. In your case if those are in good condition as you said then it might be your turn signal relay--in many car models these are located around the fuse panel somewhere, although they may not be immediately visible--also check to see if your hazard lights are working--if they are, and your fuses and bulbs aren't burnt it's probably your signal relay (note: there is one for the hazards and one for the turn signals) If your hazards and your turn signals are not working you may have a more in depth electrical problem, or both relays could be blown--however unlikely. One of the last things is look at the actual switch in the driving column that turns on your signals. Thank you for contacting fixya.com
Please get back to us if you have further query else please accept the suggestion.
106 views
Usually answered in minutes!
×