Section 13-09: Gauges, Warning Devices — Chime System
1996 Windstar Workshop Manual
DESCRIPTION AND OPERATION
Warning Chime Systems
Three distinct sounds are used to indicate the area of concern. Seat belt warning generates 1 chime per second
key-in-ignition generates 2 chimes per second
headlight on generates 4 chimes per second.
Key-In-Ignition Warning
The key-in-ignition warning will sound when the driver's front door (20125) is opened with the key in the ignition switch. It will continue to sound until the key is removed, the front door is closed, the ignition switch is turned to START or the vehicle speed is over 24 kmh (15 mph).
Safety Belt Warning
When the ignition switch is turned to RUN or START from OFF or ACC, the chime will sound for six seconds or until the safety belt is buckled.
- The safety belt warning indicator lamp (10C859) will activate for 60 seconds or until the driver's safety belt is fastened. Both the chime and lamp activate at the same time.
Anytime the ignition switch is released from START and returns to RUN while the safety belt lamp or chime is activated, the safety belt warning lamp or chime will remain activated until either the timing sequence has been executed, or the safety belt is buckled.
Headlamp Switch On Warning
The chime will be activated if the headlamps or parking lamps are ON, the key is not in the ignition and the driver's door is opened. The chime will sound at a rate of four per second.
Thanks Brad for responding. Yeah the dome light respones to the rest of the doors. Also seems odd the head lights on chime or key left in the igntion switch are not working either. Had driver's door aculator switch replace this past fall. Could this be a related problem?
I have this exact problem... I had the actuator replaced, now I've killed my battery twice from leaving headlights on, and the dome light doesnt go on when i open the door. did you find a solution? I may just have to go back to the shop.
I have the solution. It is the door sensor. When the actuator was replace the door sensor switch was probably broken. (mine was). its easy to replace and is an inexpensive part (20 bucks, tops). this is the part you need.http://www.rockauto.com/dbphp/x,carcode,...
×