SOURCE: 1994 acura vigor has abs and brakes lights on while driving?
Check for brake fluids and make sure all the brake fluid container is closed tightly. Also, you make have to bleed the brakes.
SOURCE: 1994 acura vigor
The front brake rotors are press fitted to the front wheel bearings and are removed from the car with a special tool (puller) or can be seperated by removing the whole assembly and placing it in a press to seperate them. You may damage the bearing if not done right.
SOURCE: Rear brake calipers on 94 Acura vigor are frozen and can't replar
Have you checked to see if the emergency brakes are on? Reason I ask is it's unusual that both calipers would be seized at the same time. Once the e-brake has been released visually inspect to see that the cables are also free (loose) where they attatch to the caliper. There is a technical service bulletin which states that one side can become sticky but not both seized.
SOURCE: I have a 1994 acura vigor. the dealer replaced 2
Yes it is true. It's more like a ring with gear teeth on them. In most cars it's mounted to the hubs which would include the bearings of the car. If your car has traction control you would then have wheels sensors one for each wheel. ABS is a different system. This uses sensors to monitor wheel spin when breaking.
SOURCE: 92 acura vigor clutch replcd still wont go in gear
Is all the air bled out of the hydraulics??
I would then suspect a faulty clutch component.
Was it like this before the overhaul??
54 views
Usually answered in minutes!
×