My brake lights don't work even with new bulbs. we also chceked fuses and they are okay

SOURCE: brakes lights are not working.

Hey there JABJAW,

Check the switch on the brake pedal. You'll have to contort a bit.

• Get a flashlight, get down under the dash.
• The brake light switch is near the top of the brake pedal (but not on it).
  
• When you press the pedal, does it fully extend?
• Are the wires firmly attached?
• Does the switch look damaged/corroded?
• While you're down there, double check the fuses

SOURCE: nissan almera brake lights not working,checked

Check the brake light switch under the dash at the brake peddle and make sure its working if it does not close when you depress the brake peddle the lights will not work You may hve to remove the lower cover for the dash to get at the switch

Ricky Peters

• 2620 Answers
• Posted on May 14, 2011

SOURCE: 2003 Chevy S10 Brake lights

OK try this, push and hold brake then push on the hazard switch if brake lights come on then replace the turn signal switch.

SOURCE: brake lights and turn signals

Check flasher relay & brake switch

SOURCE: i've replaced the bulbs, brake

There is a module under the truck, passenger side towards the back. replace this.