1994 Plymouth Sundance reverse lights

Hi Bradley,it could be your stop light switch,could be loose or bad,it's connected to your brake pedal,here's a link to what it look's like. http://www.autozone.com/electrical-and-lighting/stoplight-switch/duralast-stoplight-switch/plymouth/sundance/1994/4-cylinders-k-2-5l-tbi-sohc/184660_0_0

On this i think you will find you have a pluged cadilac converter. Try taking the bolts out of the pipe going to the convert and move it out of the way so not to restrict the exhaust. You may need to wire it up to the bottom of the car so it wont drag. It is going to be loud but take it for a run if it accelerates like it should you will need to replac the converter. If it doesnt then check for a code on the TPS switch. { Throttle Posions Sencor} Good luck and hope this helps.

Check this procedure...


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

i need to find the timing marks are for a 94 plymouth sundance

Hm. auto seat belt not moving points to a burnt out motor or a fuse is blown.

Have you had the starting and charging systems tested by Sears or Walmart?

How does it start?

it is side to side

To the rear of the gas tank under the car.

i need to know is it a 4 or 6 cilinder??

Double ck the wiring connector.

check you r gas lines from tank to motor,fix leak 1st ,if it still idles high let us know