1998 hyundai elantra won't move in drive or reverse hear a buzzing sound under the hood when in gear

SOURCE: why my hyundai coupe fx won't engage reverse, all

is it auto or manual

SOURCE: noise under hood like rattling sound

Try checking the heat shields on the exhaust pipe up front under the car. Alot of times they will loosen up, and begin to rattle. You can ither remove them, or try to clamp them.
Hope this helps!

anwar alkhaldi

• 197 Answers
• Posted on Mar 16, 2009

SOURCE: How to replace headlight bulb hyundai elantra 2004

yes , you need to remove the headlight cover from the back after u move the bulb conector then there is a holder for the bulb u need to push down then move.
i hope it help ,,,, thanx

SOURCE: change tke hood realase cable in hyundai elantra

Service and Repair Notes HOOD LATCH CABLE REPLACEMENT Remove the following items: Hood release handle. Radiator guard. Hood latch. Wheel guard. Using a clip remover, detach the clips from the body, then remove the hood latch cable (A) from the vehicle. NOTE: Take care not to bend the cable. Installation is the reverse of removal. NOTE: Make sure the hood latch cable is connected properly. Replace any damaged clips.

SOURCE: elantra automatic trans problems

Does the Check Engine light come ON when this happens? Whenever the "Check Engine" light comes on, there is always a DTC (Diagnostic Trouble Code) stored in the ECM (Engine Control Module). You'll need an OBDII (On-Board-Diagnostics) scanner to retrieve any codes recorded/set in ECM. Once you do this and let us know what, if any codes are set, then we can go from there.