1994 Jeep Wrangler Logo

Related Topics:

A
Anonymous Posted on May 11, 2017

94 wrangler dies in gear

94 jeep wrangler 80,000 mil 2.5ltr 5speed it idles somewhat fine it skips every now and agen if i put it in gear even on flat ground it dies out no power and engin tryes to stall but if i push in the clutch some times it will idel back up by its selph around 1500rpm and come back to around 7-800rpm i checked for leaks found an intake leak i fixed that and i changed the fuel filter cap roter plugs and ignition coil all new check engine light is on but i dont have an obd1 scanner and cant drive to mehanic please help me

1 Answer

montehammons

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Jeep Master 5,531 Answers
  • Posted on May 11, 2017
montehammons
Jeep Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Sep 14, 2011
Answers
5531
Questions
2
Helped
1645238
Points
17401

You don't need a scanner. If you cycle the key off and on 5 times, the codes will start flashing. Here is a link to jeeps and their trouble codes. There aren't that many in the older OBD-1 systems.
https://www.2carpros.com/articles/retrieve-trouble-codes-for-chrysler-dodge-plymouth-odb1-1995-and-earlier-car-mini-van-and-light-trucks

If you have no trouble codes, check fuel pressure. Multiport injection is high pressure, above 40psi, but Jeep would have specs.

  • montehammons May 11, 2017

    Chrysler and jeep -same, same. but here is jeep linkhttps://www.2carpros.com/articles/retrie... well, it just went back to Chrysler, but it's all the same.

×

5 Related Answers

Anonymous

  • 18 Answers
  • Posted on Nov 20, 2008

SOURCE: hesitation, stalling like out of gas

Clogged Catalytic Converter. What happens is as you push down harder on the accelerator you force more gas into the system causing a slightly richer mixture and more exhaust flow is neccessary. The easiest way to look for a clogged cat is when it's dark out take it for a ride causing it perform it's problem look under the vehicle if the cat is literally glowing red hot you either have a clogged cat or an extremely rich fuel mixture.

Ad

Anonymous

  • 6982 Answers
  • Posted on Feb 18, 2009

SOURCE: jeep wrangler stalls out

check idle air control, tps & map sensor. As usual with electronics, test test test before buying anything/

Anonymous

  • 322 Answers
  • Posted on Jul 09, 2009

SOURCE: My 92 Jeep Wrangler runs strong, but sometimes it

This jeeps comes with a factory defect on the electronic ingnition system, I resolve this replacing the ingnition for points type, never died again.

Anonymous

  • 169 Answers
  • Posted on Aug 29, 2009

SOURCE: 91 Jeep wrangler New everything idles rough, no Power then dies

you check for miss how is compression

rickb63

  • 170 Answers
  • Posted on Jan 16, 2010

SOURCE: Jeep wrangler 2.5. Motor idles up and down,

replace throttle position sensor

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1992 jeep wrangler 5 speed 4 cylinder shifts has

won't, not want , right?
the xfr case rear tail shaft is dead.
the 5speed box , must be in gear, is it, did you confirm it , by checking the 5speed, shifter bottom linkage that it really is in gear, did you try all 5 gears?
that be first , then see if the transfer case fails.
same way. same tests.

your post is a contradiction.
if the input to the xfr spins, the output must too, in 2wd mode. (both)
if not the xfr case has issues.
or simple linkage.

0helpful
6answers

94 Jeep Wrangler intermittently stalls when put in reverse, drive

check idling... you need to adjust this cause this is almost always the cause of stalling.
0helpful
1answer

I have a 94 toyota camry it starts fine but once in awhile the check engine light truns on then it dies, trun it back on starts put it in gear dies

Why have you not checked for codes ?

You have a check engine light on !!

You check for codes,not continue to drive,
not knowing if you have a problem or what
system set the MIL Lamp or if you should
even be using it
0helpful
1answer

94 Jeep Grand Cherokee Limited not shifting in any gears

You need to have the transmission control module tested for fault codes, AAMCO does this testing for free.
0helpful
1answer

What transfer case is on a 1994 jeep cherokee 2.5l 5speed

need transmission shop or any auto parts stores to answer that question because grand cherokee has many transfercase. NVNV231- PART TIME NPNV242 - FULL AND PART TIME NPNV249 FULL TIME 4WD THE NV249 HAS LOW RANGE GEAR REDUCTION FOR OFF ROAD. NV247 4WD ON DEMAND. THERE ARE MANY TRANSFERCASES FOR YOUR VECHICLE.CALL AUTO PARTS STORE GIVE THEM VECHICLE INFORMATION THEY CAN TELL YOU ON THE TELEPHONE WHAT TRANSFERCASE YOUR VECHICLE NEED.
0helpful
1answer

I have a 1988 jeep wrangler that won't idle.

1. check for vaccuum leaks.
2. check for a check engine code
3. check the throttle body/butterfly plate for carbon build up.
0helpful
1answer

Jeep auto trans skips second gear

That transmission drum is gone, no other alternative to dismantle and repair.
Not finding what you are looking for?

175 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...