I can not remove the rear rotors from my 2002 chrysler town and country.
Ok, i'm assuming your replacing them, there is an oval rubber stopper on the backside of the rotor, in the backing plate, located near the bottom. it will tighten or loosen the e-brake shoes inside the rotor, loosen them all the way off, then get a big hammer and give them a really good smack, be carefull not to damage the wheel studs, if your reusing them hit on the hat of the rotor, if replacing you can hit right on the rotor face.
Use some antiseize on the hub before installin your new rotors, and don't forget to readjust your
e-brake and reinstall the rubber plug
673 views
Usually answered in minutes!
where is the #5 injector located on 02 town and country
how do i take off the rear arm of a 2010 chrysler town and country
Why doesn't the transmission temp data show up on my Torque Pro app for my 2008 Chrysler Town and Country
transmission dipstick
how do you replace the cv axle seal on a 2002 town and country
DASHBOARD LIGHTS AND REAR RUNNING LIGHTS DO NOT COME ON. I HAVE A1999 CHRYSLERR TOWN AND COUNTRY
How do I reset the computer sensor codes?
2002 chrysler town and country spark plug wiring
2002 Town and Country tops out at 45 mph on highway
backup duty light
remove
rear suspension/axle &differtial for 2002 chrysler town & country torue arm
I can not remove the wiper blade from the wiper arm on 2010 town a 2010 Chrysler town and country
How do you remove the rear wiper blade from the arm
I cah not see where it goes
I have a 2002 Chrysler T&C Reverse does not work but forward gears are fine. No codes, good fluid no metal in pan. Is replacing the transmission reverse holding band a do it yourself for a non mechanic?
2002 Town and Country, forward gears work but no reverse. Is the reverse holding band a DIY project for a regular guy(not a mechanic but good mechanical ability)
×