Service engine soon light come on and had a diagnostic test done it said check circiut fuse, poor connection or a faulty H02S12(bank 1 sensoe

make sure they are plugged in tight Definition of Diagnostic Trouble Code P2270 Category: Powertrain Definition: O2 Sensor Signal Biased/Stuck Lean Bank 1 Sensor 2Note: This definition of P2270 is applied to all manufacturers

P2270 - O2 Sensor Signal Biased/Stuck Lean Bank 1 Sensor 2 Comments ' Add Yours
Possible causes
- Faulty Rear Heated Oxygen Sensor Bank 1
- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Exhaust gas leaks Help with this
When is the code detected?
The Powertrain Control Module (PCM) detected the HO2S12 sensor has reported a lean condition for an extended period during an intrusive test
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust
P2270 Description
The Powertrain Control Module (PCM) supplies a voltage of about 450 mV between the HO2S high and low signal circuits. The oxygen sensor varies the voltage over a range from about 1,000 mV when the exhaust is rich, down through about 10 mV when the exhaust is lean.
The PCM monitors and stores the heated oxygen sensor (HO2S) voltage information. The PCMevaluates the HO2S voltage samples in order to determine the amount of time the HO2S voltage was out of range. The PCM compares the stored HO2S voltage samples taken within each sample period and determines if majority of the samples are out of the operating range.

Definition of Diagnostic Trouble Code P2272 Category: Powertrain Definition: O2 Sensor Signal Biased/Stuck Lean Bank 2 Sensor 2Note: This definition of P2272 is applied to all manufacturers

P2272 - O2 Sensor Signal Biased/Stuck Lean Bank 2 Sensor 2
' Add Comment
Possible causes
- Faulty Rear Heated Oxygen Sensor Bank 2
- Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Exhaust gas leaks
What does this mean?
When is the code detected?
The Powertrain Control Module (PCM) detected the HO2S22 sensor has reported a lean condition for an extended period during an intrusive test
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust
P2272 Description
The Powertrain Control Module (PCM) supplies a voltage of about 450 mV between the HO2S high and low signal circuits. The oxygen sensor varies the voltage over a range from about 1,000 mV when the exhaust is rich, down through about 10 mV when the exhaust is lean.
The PCM monitors and stores the heated oxygen sensor (HO2S) voltage information. The PCMevaluates the HO2S voltage samples in order to determine the amount of time the HO2S voltage was out of range. The PCM compares the stored HO2S voltage samples taken within each sample period and determines if majority of the samples are out of the operating range.
P2272 Information for specific makes
P2272 BMW
P2272 DODGE
P2272 FORD

P0303 Code - Cylinder #3 Misfire
P0110 DTC - IAT Circuit Malfunction
P2195 O2 Sensor Signal Biased/Stuck Lean (Bank 1 Sensor 1) Code
Potential causes of a P2195 code include:
p2195
p219521

• Oxygen (O2) or A/F ratio sensor or sensor heater malfunction
• Open or short in O2 sensor circuit (wiring, harness)
• Fuel pressure or fuel injector problem
• Faulty PCM
• Intake air or engine vacuum leaks
• Faulty fuel injector(s)
• Fuel pressure too high or too low
• PCV system leak/fault
• A/F sensor relay faulty
• MAF sensor malfunction
• ECT sensor malfunction
• Fuel pressure too low
• Fuel leak
• Air suction in air intake system
• A code P0303 may mean that one or more of the following has happened:
  

• Faulty spark plug or wire
• Faulty coil (pack)
• Faulty oxygen sensor(s)
• Faulty fuel injector
• Burned exhaust valve
• Faulty catalytic converter(s)
• Running out of fuel
• Poor compression
• Defective computer
• Potential causes of the P0110 DTC include:
  
• 
  po110
  • IAT sensor shifted out of airflow
  • Bad IAT sensor
  • Shorted to ground or open on signal circuit to IAT
  • Open in ground circuit to IAT
  • Poor connection at IAT (backed out terminals, broken connector locks, etc.)
  • Bad PCM

P0442 FORD - Evaporative Emission System Leak Detected Small Leak

Possible causes- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
P0136 - O2 Sensor Circuit Malfunction Bank 1 Sensor 2
Possible causes- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

P0141 FORD - O2 Heater Circuit Bank 1 Sensor 2

Possible causes- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)

P0132 FORD - O2 Sensor Circuit High Voltage Bank 1 Sensor 1Possible causes- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Front Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

These codes, po 138 bank 1 sensor 2 shorted to voltage and code po158 means bank 2 sensor two shorted to voltage. these are the two rear oxygen sensors in the exhaust system. there two up frt and two in the rear, check the wiring on the two rear sensors, make sure that the wiring is not cut or stuck between metal. if the wiring is good then replace both rear sensors, when you get them ask for the left and right after the cat sensors. or bk1 s2 and bk2s2. after replacing them reset the computer. go to an auto parts sotre or if you have a code reader you can do it. hope this helps good day.

There is not cut and dry solution for this code, here are the possibility's
P0132 - O2 Sensor Circuit High Voltage Bank 1 Sensor 1 Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust Possible causes - Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Front Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

P0138 CHRYSLER - O2 sensor 1/2 Circuit high
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust Possible causes - Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

P2240 HONDA - Front Air/Fuel Ratio Sensor Bank 2 Sensor 1 IP Line High Voltage.
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust Possible causes - Air/Fuel Ratio Sensor Bank 2 harness is open or shorted
- Air/Fuel Ratio Sensor Bank 2 circuit poor electrical connection
- Faulty Air/Fuel Ratio Sensor Bank 2
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

P1040 VOLKSWAGEN - Injector 1 Supply Voltage Circuit Malfunction

Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)

Possible causes:
- Injector 1 circuit open or shorted
- Injector 1 circuit poor electrical connection
- Faulty injector 1

Test it and keep us updated.

Heated oxygen sensor bank 1 sensor 2, what was the code numbers that came up?