Question about 2001 Ford Focus

1 Answer

Changed cambelt n 1600 ford focus wnt start wat can it be

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,370 Answers

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Posted on Mar 03, 2012

Ad

6 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 125 Answers

SOURCE: change cambelt

assuming that you are asking about the timing belt?. if you are not mechcanically inclined, you might not want to tackle this one yourself. if you don't do exactly what needs to be done you will be doing damage and costing yourself a whole lot more than you would have "if" it would have been done by a professional.

Posted on Sep 22, 2008

jaysonemanme

Jason Phillips

  • 500 Answers

SOURCE: 2000 ford focus wont start sometimes but wait a

there is a fusible link in the pos. batt. cable that goes bad, have it replaced your prob will go away...i promise... goodluck!

Posted on May 21, 2009

mike hayward

  • 279 Answers

SOURCE: 2004 1.8tdci 115bhp ford focus lx- cambelt change?

if it has a belt (not a chain) it will need replacing when the car is 10 years old or when the engine has done 100 000 miles or which ever comes first

please let me know if this helps
cheers
big mike :)

Posted on Jan 05, 2010

jimmyguru

  • 122 Answers

SOURCE: can you show me a picture of timing on ford focus

there is not marks.you must have special tools to change the cambelt and retiming the engine.the camgears are conejointed in camshafts dont try anything!a haynes manual can help you but much better an experianced engineer must do this!the zetec engines are sophisticated with variable timing and complicated working procedure.

Posted on May 28, 2010

Anonymous

  • 7 Answers

SOURCE: cambelt change ford focus 1.8tdci

You need to get an auto repair manual for that specific auto and follow the instructions to the letter. You have to be able to find top dead center. This is when the number on piston, which is closest to the front of the car, is in on the top of the compression stroke, with both valves closed. The timing mark will be on zero. Follow the instructions.

Posted on Jul 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ford focus starting thats been stood for 12 months


change the oil and filter first if you can turn the motor by hand to make sure its not siezed. pull the plugs and put a little diesel in them put plugs back in . make sure your battery is good and crankit it a little to the oil moving through out the engine

Jul 26, 2014 | 2000 Ford Focus

1 Answer

Ford focus mark 2 2002 1600 cc using exsessive amounts of petrol can these cars be tuned to improve this


Start with a K&N Air Filter, New Plugs, Fuel Filter and make sure your Tires are at the recommended Air Pressure

Apr 09, 2013 | Cars & Trucks

1 Answer

Can you show me a picture of timing on ford focus 1.8 tddi enduro di engine (cambelt)


there is not marks.you must have special tools to change the cambelt and retiming the engine.the camgears are conejointed in camshafts dont try anything!a haynes manual can help you but much better an experianced engineer must do this!the zetec engines are sophisticated with variable timing and complicated working procedure.

May 13, 2010 | 2001 Ford Focus

2 Answers

At what mileage should spark plugs be changed


plugs should be change at 40 k/4years as part of the big service.(cambelt at 60k)

May 12, 2010 | 2006 Ford Focus

1 Answer

2004 1.8tdci 115bhp ford focus lx- cambelt change?


if it has a belt (not a chain) it will need replacing when the car is 10 years old or when the engine has done 100 000 miles or which ever comes first

please let me know if this helps
cheers
big mike :)

Oct 13, 2009 | 2004 Ford Focus

4 Answers

2001 Ford Focus stopped running while i was driving and wont start. Makes a churning sound but no power is going to engine. I changed the ignition coil, still wont turn on. Any suggestions?


Can you explain more so I can help. What do you mean still wont turn on, engines doesn't start or starter motor doesn't turn. Have u taken out a spark plug and connected it to the cable put the end of the spark plug to a ground and make someone turn on the engine for a few seconds you should see some blue sparks. Carefully use gloves. If no sparks, spark plug is bad next thing to check instead of putting the spark plug in the cable put Philips screwdirver put the screwdriver near a ground not touching about one inch make someone turn the engine for a couple of second you should see the spark jumping from the screwdriver to the ground, If there are no sparks ignition coil or spark plug cables are not good. But u say u changed ignition coil so maybe your cables are not good. There is a connector near the ignition coil disconnect it and turn ignition switch on measure the voltage you should have in between 12vdc + or - .5 vdc if no voltage present there is a blown fuse, Check for it

Jul 23, 2009 | 2001 Ford Focus

1 Answer

2000 ford focus wont start sometimes but wait a


there is a fusible link in the pos. batt. cable that goes bad, have it replaced your prob will go away...i promise... goodluck!

May 08, 2009 | 2001 Ford Focus

1 Answer

Change cambelt


assuming that you are asking about the timing belt?. if you are not mechcanically inclined, you might not want to tackle this one yourself. if you don't do exactly what needs to be done you will be doing damage and costing yourself a whole lot more than you would have "if" it would have been done by a professional.

Sep 12, 2008 | 2000 Ford Focus

2 Answers

Ford focus 2002 petrol zetec


ford part stores sell them, any ford recovery/wrecker will have them,

Jul 17, 2008 | 2001 Ford Focus

1 Answer

Cambelt - Ford Focus


what do you mean by a valve timing table?????? who said you need one of these

Jun 23, 2008 | 2005 Ford Focus

Not finding what you are looking for?
2001 Ford Focus Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...