I can't get the battery charge light to come on. I have put two Altenators, batery, and checked all my fuses. I even when and bought another instrument cluster, does the same thing. It will charge but I am only getting a little over 12 volts. When I put the new cluster in I got it to charge 14 but that did not last very long. I don't have a draw from the battery when the key is off. Sean
Check all major grounding points clean all with brush or grinder and use vaseline on connection points. This will include the motor to chassis ground as well as battery to frame ground (very important).
SOURCE: Reverse lights inop on 2001 Ford Explorer Sport
Sounds like a bad back up light switch. Most are located in console w/ shifter.
SOURCE: 2000 Ford Ranger XLT electrical problem
I suggest the possibility of a loose connector, maybe the main engine connector remove inspect pins apply diaelectric compound and reconnect the connector with care to assure good contact with all pins.
SOURCE: direction on how to replace instrument
You're done.
415 views
Usually answered in minutes!
×