I Need A Tacho Wiring Diagram for a 1998 Daewoo Lanos

Note the diagram. The black wire is ground. The pink wire is voltage, fuse protected circuit, hot with key on. The brown wire with white tracer is signal wire goes to computer.

I suggest an Auto Electrician....... but you CAN do this.... BASICALLY it is a wire running from the Power Scource.... Ignition Switch,.... to the Tacho, then from Tacho to Distributor if it is a Petrol Vehicle, but a DIESEL is completely different..... THAT needs a Vacuum operated Tacho via the Injector Pump and I STRONGLY Recommend a Electrician for that..... Pain in the *** to fit to a Diesel.... I HAVE A diesel.....

That's easy to run a tach u will need to run a wire to the coil pack plug it to any cylinder which there are 4 any one will work then to the tach

auto diagnostic tool

Click on the link below to learn how to wire a tachometer to your 1998 Daewoo Lanos

http://www.ehow.com/how_4830244_wire-a-tachometer.html

How many wires 1 ,3 or 4 and colours on lambda sensor? on most lambda sensors the Black wire is the sender wire but on yours I`m sure its blue ,as for the tacho gauge you need a wiring diagram for the ECU as you need to connect it there or pull the dash clocks out (carefully)

You can use the blue wire from the distributor plug. Conatct i fyou need more help thanks for using FIX YA

www.autozone.com has free online repair manual and is free to register Just follow the plug wire. What plug wire did you have it on? Should have it on #1 cylinder wire.

its the red and white wire behind the guages

This site offers the manual for your car as a download for $9 US which is about half the cost of hardcopy from Haynes or Chilton:
TradeBit car manuals
I've always found having the manual for any car is my first priority when buying a new horse for the stable; they always pay you back.