Have a list of code and correct it one by one.
some error code have same correction.
need your patiences to do this.
SOURCE: 1st and o/d gear do not work and O/D light flashes
I would say that the 1 gear and odo is out. Transition may need replaced but first you have codes great, shucks automotive will place a reader to your codes and tell you for free what it is, You may be able to call and tell the codes but I would do that step, The only ones that are going to have the answers to the codes are dealers, auto shops and parts stores. Part stores are free. If you don't have odo placed on the dash board then push the odo butten and it should say odo off then when the car is shut off it should go back to the way it should when you start the car again, and odo should not be showing because it is always on . In stead of trying to go to a auto mechanic I would place phone calls most of them are very nice and information is very helpful, The ford store is very happy to give you any info you need.
Nikki2913
781 views
Usually answered in minutes!
most of the codes are for the o2 sensor needing to replaced, and the other codes are saying that the solenoids in the ****** are malfunctioning and that the shift solenoid is short circuiting. the ****** had been replaced once after 80,000 miles and there doesn't seem to be having a problem shifting or anything to that nature
could there be a wire that loose and thats why all the transmition codes are on?
×