The location of WHAT???
Diagnostic Test Code (DTC) P1250 is a manufacturer - specific code which has a general description of "Pressure Regulator Control (PRC) Solenoid Circuit Malfunction".
The PCM monitors input voltage at Pin number 44 when the ignition is turned on. DTC P1250 sets when less than .44 volts are present. The possible causes are:
> PRC Valve malfunction (open or shorted internally)
> Open or short circuit between the PRC valve and the PCM (control circuit)
> Open or short circuit in the solenoid ignition voltage supply circuit
> Failed PRC valve (stuck open)
> Malfunctioning PCM
Find the fuel rail. On the the end of one of the rails you will see the fuel pressure regulator. It will have a small vacuum hose coming out of the top of it. Follow that hose to the fuel pressure regulator solenoid.
Lmk
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
SOURCE: where its the location for this code p1250
Find the fuel rail. On the the end of one of the rails you will see the fuel pressure regulator. It will have a small vacuum hose coming out of the top of it. Follow that hose to the fuel pressure regulator solenoid.
Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
2,738 views
Usually answered in minutes!
×