How to change the spark plugs wire in a 1996 pontiac sunfire?
No response
2.2L and 2.4L are both extremely easy. If the 2.2L You'll need a a flat head screw driver for the clips and a pair of pliers to remove the boots. Remove one wire at a time. longest from the left to shortest to the right. If the 2.4L engine, they are small boots that are connected directly to the plugs to a coil- on-plug set up. You'll need to remove the 4 10mm or 13mm Bolts (can't remember which they are.) On the right hand side there is a black clip you need to remove. Once that is removed you can pickup the entire aluminum housing and you'll sell the boots them selves. Replace your new boots on to the plate and gently set the housing back down in there correct holes. Press down once all aligned and it will be ready for the bolts. If you need any clarifications, message me back and we'll go from there. Thank you for using fixya.com here is a link for a picture of what the boots will look like if you have the 2.4L engine. http://l.yimg.com/g/images/spaceball.gif
389 views
Usually answered in minutes!
what engine 2.2 =2.4 ??
×