the idle was adjusted 12 months ago(higher) it was never lowered again. Is that what's causing the high CO reading? if so how do I readjust the idle myself?the idle was adjusted 12 months ago(higher) it was never lowered again. Is that what's causing the high CO reading? if so how do I readjust the idle myself?
AnonymousMar 25, 2014
Detail procedure for removal and installation of transmission mountDetail procedure for removal and installation of transmission mount
You can't post conmments that contain an email address.
There should be a factory diagram at the front of the radiator top plate near the passenger side. That's where it is on mine, and it shows with and without AC. I hope that helps
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is GM 2.5L engine. My art isn't very good. The belt should be on passenger side of engine. This is serpentine belt. Sometmes there is a decal under the hood that shows the belt routing.
My apologies for the delayed response. I am going back to answer unanswered questions. CLICKon the following LINK. It has the Serpentine Belt Diagrams you will need. If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com! Again my sincerest apologies... Thanks!
2000
OLDSMOBILE INTRIGUE - V6 3.5L 214ci GAS FI N H
Serpentine Belt routing diagram
You will need a ratchet and a strong friend. Put the ratchet on the
bolt on the pulley that moves. You will know which one it is because
when you turn it the belts wll loosen and tighten on the pulley. have
some one hold the ratchet down so you can remove the belt from the
pulley... pull it off.
Remember how it came off to put it back on. Once
you pull the belt off you can let the ratchet go. Put the belt parallel
with the pulley and pull the ratchet down. When it loosens the pulleys
slide the belt on and let the ratchet go. Remove ratchet. Don't start
the car but tap the key forward 3 to 4 times to make sure the belt is
on track.
Then start it up!
More details and graphics you can find in autozone.com (free register).
Hope helped with this; remember rated this help. Good luck.
CLICKon the following LINK.
It has the Belt Diagrams you will need. If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
i dont know if the motor mount comes off or not
the idle was adjusted 12 months ago(higher) it was never lowered again. Is that what's causing the high CO reading? if so how do I readjust the idle myself?
Detail procedure for removal and installation of transmission mount
×