I really need the torque spec's for the bolt's holding the big end cap on the conrod
Is there anyone who can help.me with my golf Mk1 main bearing caps,Conrod caps,head bolts etc please
Does anyone know the torque specs for a 1986 chevy 350 2-bolt main rod bearing cap nuts
Copy and paste that also
Torque sequence:
Step 1: Torque 29 to 34 Ft/Lbs
Step 2: Torque an additional 90 to 120 degrees
Main Bearing Cap Torque
For your 1997 Ford Truck F150 1/2 ton P/U 2WD 4.6L EFI :
Foot pounds (Final torque)
Note:
Torque sequence
Step 1: torque all vertical main bearing bolts
to 32 Ft/Lbs
Step 2: turn all vertical main bearing bolts an
additional 95-degrees
Step 3: torque all horizontal main bearing cap side
bolts to 24 Ft/Lbs
Step 4: turn all horizontal main bearing cap side
bolts an additional 90-degrees
Head Bolt Torque
For your 1997 Ford Truck F150 1/2 ton P/U 2WD 4.6L EFI :
Foot pounds (Final torque)
Note:
Torque sequence: -----------------
| 10 6 2 4 8 |
| |
| 9 5 1 3 7 |
-----------------
front of engine
-----------------
| 9 5 1 3 7 |
| |
| 10 6 2 4 8 |
-----------------
Step 1: torque in sequence from 28 to 31 Ft/Lbs
Step 2: turn an additional 85-95 degrees
Step 3: turn an additional 85-95 degrees
*** CAUTION ***
engine uses Torque To Yield head bolts (TTY) that
permanently stretch during the initial installation.
New head bolts must be used when cylinder head is
replaced or re-installed to obtain proper torque.
Intake Bolt Torque
For your 1997 Ford Truck F150 1/2 ton P/U 2WD 4.6L EFI :
Foot pounds (Final torque)
Note:
Torque lower manifold bolts to 18 in/Lbs
Torque lower manifold bolts to 5 Ft/Lbs
Torque lower manifold bolts to 9 Ft/Lbs
torque upper manifold bolts to 11 Ft/Lbs
torque upper manifold bolts to 22 Ft/Lbs
(to torque bolts & nuts, start in center using
crisscross pattern)
Exhaust Manifold Bolt Torque
For your 1997 Ford Truck F150 1/2 ton P/U 2WD 4.6L EFI :
20 Foot pounds (Final torque)
Note:
Note:
to torque bolts & nuts, start in center using
crisscross pattern working outward
Rod Bearing Cap Torque
For your 1997 Ford Truck F150 1/2 ton P/U 2WD 4.6L EFI :
Foot pounds (Final torque)
Note:
Torque sequence:
Step 1: Torque 29 to 34 Ft/Lbs
×
3,713 views
Usually answered in minutes!
1988 f250 diesel flywheel bolt torque spec
Torque specs big end bearings DAIHATSU DL 2.8 diesel
what are the main bearing and conrod cap tightening torque for a Toyota yaris 1nz
Torque specs couch
Front and rear caliper and caliper anchor bracket bolts
×