Replace a 2004 headlight light bulb - 2004 Lexus ES 330

SOURCE: How do you replace the head light bulb on a 2004 Mazda 6?

it depends whether it is the o/s or n/s you either need to take the windscreen washer res out which is simply unscrew 2 bolts on top and lift it out of the way so you can gain acsess to the light unit then its pretty much plain sailing.or you need to remove the fuse box unit on the otherside

SOURCE: replace bulb ford focus

i have a 2003 st170 and to replace my bulbs you have to release the flaps on the back of the light by pushing the metal clip down. remove the cover completely.
on the bulb will be a metal clip i think if you push the end which will be towards the wing of the car down and then it will swing towards you and release the bulb.
remove bulb and replace with new.
try not to handle the bulb with your bare skin use a tissue to handle it with.
when fitting the new bulb make sure you get the groove in the bulb inline with the one in the housing this way the bulb will sit in the correct position its easy enough.

repeat for the opposite side... im not sure about your car but with the st170 you have to remove the battery in order to replace the drivers side bulbs.

i hope thats of some help to you.

SOURCE: how do you replace headlight bulb for a 2004 landrover discovey

yes that is right the grill needs to come off. three plastic clips top front of grill
you can take the headlight out one star screw on the top and a pozzy screw to the side behind the grill it has to be poped out of the bottom of the headlight
then you can get to the back of your head lamp ok

anwar alkhaldi

• 197 Answers
• Posted on Mar 16, 2009

SOURCE: How to replace headlight bulb hyundai elantra 2004

yes , you need to remove the headlight cover from the back after u move the bulb conector then there is a holder for the bulb u need to push down then move.
i hope it help ,,,, thanx

SOURCE: replacing my headlight bulb in my kia amanit 2004

1. Open the hood of your KIA Amanti and look behind the headlight that has gone out. Locate the round knob on the back of the headlight.
   
2. Turn the knob counterclockwise 1/4 of a turn and gently remove it from the back of the headlight. Carefully remove the electrical cable within the headlight housing that is attached to the back of the headlight bulb.
   
3. Locate the metal clip that holds the light bulb in place by pushing the clip arm straight in and sliding it down. Remove the bulb from the headlight housing.
   
4. Replace the old headlight bulb with new bulb. Secure it by sliding the metal clip up to hold the bulb in place. Reattach the electrical cable and replace the round knob to the back of the headlight housing.
   
5. Turn on the headlights to verify that they are in working order.