I am fixing my head gasket on a 94 ford aspire, what all gaskets do i need to replace besides the head gasket
SOURCE: head gasket 'blown' on 94 Nissan Cefiro, 2.5L, 24
if you get a haynes repair manual and follow it step by step everything should go fine. or clintons. if you have questions about what its telling you to do then that would be a good thing to ask. the problem is there are alot of different designs for engines and it could be affected and it could not be. but if your not sure you definitly need a repair manual. it would tell you everything but it will guide you in the right direction
SOURCE: Im replacing the head gasket on my 94 GS300 and
step # 1 tighten 25 ft lbs,
step# 2 tighten 90%
step # 3 tighten another 90%
note do in sequence start closest to belt one head at a time start at the bottom 1 then to the top all the way to the other side is 2 then back to other side on top now is 3 then back to other side bottom is 4 keep do this working your way to the center do this with each step thats the sequence. hope this helps. note thses are strech bolts use new ones dont reuse old ones, put a little oil on threads. good luck.
Testimonial: "Thank you. You dont know how long I've been looking for solutions to this damn car."
SOURCE: NEED FORD 2.2l head gaskets torque chart
Tighten the head bolts 29 to 32 ft lbs , then tighten again to 59 to 64 ft lbs
SOURCE: what gaskets do I need
Head bolts and head gaskets. Let's see, you will need a lower and upper intake set as well. These head gaskets usually blew because bad fan relays caused the gaskets to blow and warped the heads. Ford used cheap oil pressure switches that leaked as well.
Testimonial: "thanks for ur help "
353 views
Usually answered in minutes!
×