1992 honda prelude, cant figure out where vacuum hose goes

SOURCE: how to fix the tachometer/speedometer

i have 91 honda prelude.and the speedometer is not working properly.what else can i find help.and look for to fix this problem

SOURCE: 1992 Honda Prelude Timing Belt Diagram

There's no such thing as a timing belt diagram.

Do you mean to say the "Procedure" for changing a timing belt in a 92 Prelude?

By asking such a question I can only interpret it as a clear indication that you've never changed a timing belt before.

If this is true, then you don't want to start out or practice on your own car.

Get the car to a pro and have the job done right.

If not true (and you've changed timing belt's in the past)

Then give me the engine size and I'll post the:

"PROCEDURE" for changing the belt in a few hours.

SOURCE: bottom radiator hose cold. upper radiator bulging.

well - "easy" is relative.
To me - it may be easy - tou you... only you can be the judge.
If you feel comfortable replacing the timing belt properly - then i'd go for it.
Just know - if you have problems - you will have to tow the vehicle to the mechanic.

I have used eBay since the early 90's and have never gotten taken.
The sellers rating is important - and look at the feedback of the seller to make sure they are living up to their end of the deal.

When you have a new pump - re-post and we can give you some help and tips if you want to tackle yourself.

A Haynes manual would be a great help to you also. Look for those on eBay as well. They basically tear down a car and put it bcak together. EVERY PIECE.

Thanks for using FixYa - a FixYa rating is appreciated for taking the time to answer your FREE question.

SOURCE: No vacuum hose routing diagram under the hood 1987 honda accord

email me at [email protected]
I will send u it

SOURCE: 1989 honda prelude. engine surges. from normal to 2100 rpms

There is a warm up valve on the throttle body(should have 2 small coolant hoses). remove the valve and have someone start the car while you block the port to the valve on the intake. If that clears up the problem you can cut a piece of cardboard to mount in between the valve and intake.should straighten it out.