Jumpstart 1995 oldsmobile aurora

I'm not sure if the Aurora is a special type of car that requires a different way of jumping, but when u jump start most cars, you place the red end of the jumper cables on the positive/ red side of the battery and the black end on the negative. You want to make sure the jumper clamps are touching the metal part of the battery post (so if there's covers on the battery posts, move them so the cables have good connection. The same procedure is used on both cars. Be careful not to touch the end of the cables together, as doing so will make them spark if one end is connected to the running vehicle. Let your car charge a minute then try to start. If it starts, let it charge for 5-10 minutes and run/ drive your car after disconnecting to make sure the battery does not die the next time you shut it off. If it does not start after a few minutes of charging, adjust the clamps to make sure they have a good connection, wait 2-5 minutes longer & try to start your car again. *It is normal to hear the car that is jumping you idle more quietly when your car starts pulling juice from the charged battery. Also, remove jumper cables after charging, making sure not to touch the ends togther- as it will spark again. *it is not necessary to shut off the car that's jumping you before attatching the cables, or after charging. If your car still doesn't start after repeatedly adjusting cables and trying other cables to see if it is the cables not working, you may need a new battery or alternator. I would have the battery tested to see if you need a new battery before considerring the altinator.